Sort by: Author, Year, Title

List of literature

• Advanced overpressure protection: A concept for smart controlled safety pressure relief systems.
  Carsten Schmidt, Jürgen Schmidt, Jens Denecke and Jörg Seewig
  Process Safety and Environmental Protection, (2024)
  DOI: 10.1016/j.psep.2024.08.061
  https://www.sciencedirect.com/science/article/pii/S0957582024010322?via%3Dihub
  
• Application of Smart Overpressure Protection Devices to batch and semi-batch processes: The zero-emission mode.
  Carsten Schmidt, Jürgen Schmidt, Jens Denecke and Jörg Seewig
  Process Safety and Environmental Protection, Vol. 181, S. 535-546. (2024)
  DOI: 10.1016/j.psep.2023.11.061
  https://www.sciencedirect.com/science/article/pii/S0957582023010662?via%3Dihub
  
• Application of smart overpressure protection devices to batch and semi-batch processes: The smart relief mode.
  Carsten Schmidt, Jürgen Schmidt, Jens Denecke, Jörg Seewig and Christina Henning
  Process Safety and Environmental Protection, Vol. 188, S. 439-452. (2024)
  DOI: 10.1016/j.psep.2024.05.107
  https://www.sciencedirect.com/science/article/pii/S0957582024006293?via%3Dihub
  
• Bayesian analysis of uncertainties in circle, straight-line and ellipse fitting considering a-priori knowledge − comparative analysis with total-least-squares approaches.
  Andrej Keksel, Benjamin Eli, Matthias Eifler and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 12, Nr. 1, S. 1-14. (2024)
  DOI: 10.1088/2051-672X/ad2ba0
  https://iopscience.iop.org/article/10.1088/2051-672X/ad2ba0
  
• Comprehensive angular scattering distribution analysis for resource-efficient manufacturing.
  Matthias Eifler, Boris Brodmann, Barbara Linke, Alexander Müller and Jörg Seewig
  Procedia CIRP, Vol. 120, S. 386-391. (2024)
  DOI: 10.1016/j.procir.2023.09.007
  https://www.sciencedirect.com/science/article/pii/S2212827123007394?via%3Dihub
  
• Comprehensive profile and areal calibration by additively manufactured material measures.
  Matthias Eifler, Julian Hering-Stratemeier, Georg von Freymann and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 12, Nr. 1, S. 1-30. (2024)
  DOI: 10.1088/2051-672x/ad2985
  https://iopscience.iop.org/article/10.1088/2051-672X/ad2985
  
• Control concept for the regulation of the surface layer properties using consecutive cuts in cryogenic hard turning of AISI 52100.
  Felix Grossmann, Viktor Follmann, Tong Zhu, Julian Uebel, Stefan Wolke, Benjamin Kirsch, Marek Smaga, Jörg Seewig, Tilmann Beck and Jan C. Aurich
  Production Engineering, Vol. 18, Nr. 2, S. 253-265. (2024)
  DOI: 10.1007/s11740-023-01259-7
  https://link.springer.com/article/10.1007/s11740-023-01259-7
  
• Correlational study of multiscale analysis and the metrological characteristics of areal surface topography measuring instruments.
  Matthias Eifler, Julian Hering-Stratemeier, Georg von Freymann, Christopher A. Brown and Jörg Seewig
  Surface Topography: Metrology and Properties, (2024)
  DOI: 10.1088/2051-672X/ad5a29
  https://iopscience.iop.org/article/10.1088/2051-672X/ad5a29
  
• Erprobung einer miniaturisierten Infrarotspektroskopie zur Messung von Alterungseffekten in Öl [Testing of miniaturized infrared spectroscopy for the measurement of ageing effects in oil].
  Julian Uebel, Yvo Stiemcke, Maximilian E. Huber, Carl Christian Rheinländer, Stefan Thielen, Oliver Koch, Norbert Wehn and Jörg Seewig
  Technisches Messen, Vol. 91, Nr. 10, S. 515-523. (2024)
  DOI: 10.1515/teme-2024-0058
  https://www.degruyter.com/document/doi/10.1515/teme-2024-0058/html
  
• Greybox-Modelle in der Zerspanung Grundlagen zur Verschleißvorhersage beschichteter Werkzeuge beim Drehen [Greybox Models in Machining Basics for Wear Prediction of Coated Tools During Turning].
  Maximilian Berndt, Hagen Schmidt, Lars Müller, Eberhard Kerscher, Jörg Seewig and Benjamin Kirsch
  Zeitschrift für wirtschaftlichen Fabrikbetrieb, (2024)
  DOI: 10.1515/zwf-2024-1099
  https://www.degruyter.com/document/doi/10.1515/zwf-2024-1099/html
  
• Intercomparison to validate implementations of different laboratories of algorithms for the analysis of surface texture.
  Dorothee Hüser, Jörg Seewig, Raimund Volk, Arne Deppe, Eduard Kustan, Frank Depiereux, Maik Meyer, Nils Koppert, Arnim Weidner, Stefan Feifel, Alexander Müller, Florian Schwarzer, Shaojun Xiao, Matthias Lehmann and Wilhelm Blumenschein
  Surface Topography: Metrology and Properties, (2024)
  DOI: 10.1088/2051-672X/ad5e9e
  https://iopscience.iop.org/article/10.1088/2051-672X/ad5e9e
  
• Low-Cost Predictive Maintenance Monitoring Concept for Forming Presses.
  Tim Becker, Paaranan Sivasothy, Jannik Keber and Jörg Seewig
  Procedia CIRP, Vol. 120, S. 1540-1545. (2024)
  DOI: 10.1016/j.procir.2023.09.220
  https://www.sciencedirect.com/science/article/pii/S2212827123009526?via%3Dihub
  
• Model‐based analysis of the influence of surface roughness on fatigue processes.
  Sikang Yan, Arsalan Jawaid, Eberhard Kerscher, Jörg Seewig and Ralf Müller
  Proceedings in Applied Mathematics and Mechanics, Vol. 24, Nr. 2, S. 1-8. (2024)
  DOI: 10.1002/pamm.202400039
  https://onlinelibrary.wiley.com/doi/10.1002/pamm.202400039
  
• Untersuchungen zur Mindestspanungsdicke beim kryogenen Hartdrehen von Wälzlagerstahl [Investigations into the Minimum Chip Thickness for Cryogenic Hard Turning of Roller Bearings Steel].
  Felix Grossmann, Benjamin Kirsch, Julian Uebel, Jörg Seewig and Jan C. Aurich
  Zeitschrift für wirtschaftlichen Fabrikbetrieb, (2024)
  DOI: 10.1515/zwf-2024-1089
  https://www.degruyter.com/document/doi/10.1515/zwf-2024-1089/html
  
• Ball-end micro-milling of material measures: wear behavior in field use.
  Katja Klauer-Dobrowolski, Matthias Eifler, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  International Journal of Advanced Manufacturing Technology, Vol. 128, Nr. 1, S. 611-623. (2023)
  DOI: 10.1007/s00170-023-11856-6
  https://link.springer.com/article/10.1007/s00170-023-11856-6
  
• Compact hand-guided 3D scanning terahertz sensor platforms with 3D-printed aspherical telecentric f-θ lens.
  Shiva Mohammadzadeh, Raphael Hussung, Andreas Keil, Sven Leuchs, Christian Krebs, Dirk Nüßler, Jörg Seewig, Georg von Freymann and Fabian Friederich
  International Journal of Microwave and Wireless Technologies, Vol. 15, Nr. 6, S. 1027-1037. (2023)
  DOI: 10.1017/S1759078723000259
  https://www.cambridge.org/core/journals/international-journal-of-microwave-and-wireless-technologies/article/compact-handguided-3d-scanning-terahertz-sensor-platforms-with-3dprinted-aspherical-telecentric-f-lens/4DE80227E18BF9ACE7D31DC688252341
  
• Compatibility analysis of profile and areal material measures.
  Matthias Eifler, Julian Hering-Stratemeier, Georg von Freymann and Jörg Seewig
  Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
  DOI: 10.1117/12.2672243
  
• Construction of a time-domain full-field OCT for non-contact volumetric layer thickness measurement.
  Georgis Bulun, Marvin Lotz, Andrej Keksel, Gerhard Stelzer and Jörg Seewig
  Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
  DOI: 10.1117/12.2673664
  
• Discrete Filter and Non-Gaussian Noise for Fast Roughness Simulations with Gaussian Processes.
  Arsalan Jawaid, Jörg Seewig, Jan C. Aurich, Christoph Garth and Barbara S. Linke
  Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes, (2023)
  DOI: 10.1007/978-3-031-35779-4_1
  https://link.springer.com/chapter/10.1007/978-3-031-35779-4_1
  
• Extreme Ultra-Wideband Optoelectronic Frequency-Modulated Continuous-Wave Terahertz Radar.
  Shiva Mohammadzadeh, Andreas Keil, Michael Kocybik, Lauri Maximilian Schwenson, Lars Liebermeister, Robert Kohlhaas, Björn Globisch, Georg von Freymann, Jörg Seewig and Fabian Friederich
  Laser and Photonics Reviews, Vol. 17, Nr. 11, S. 1-11. (2023)
  DOI: 10.1002/lpor.202300396
  https://onlinelibrary.wiley.com/doi/10.1002/lpor.202300396
  
• Geometrical, Microstructural, and Chemical Characterization.
  Michael Kopnarski, Tilmann Beck, Stella Diederichs, Eberhard Kerscher, Jörg Seewig, Marek Smaga, Jan C. Aurich and Hans Hasse
  Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
  DOI: 10.1007/978-3-031-35575-2_2
  https://link.springer.com/chapter/10.1007/978-3-031-35575-2_2
  
• Insufficiency-Driven DNN Error Detection in the Context of SOTIF on Traffic Sign Recognition Use Case.
  Lukas Hacker and Jörg Seewig
  IEEE Open Journal of Intelligent Transportation Systems, Vol. 4, S. 58-70. (2023)
  DOI: 10.1109/ojits.2023.3236531
  https://ieeexplore.ieee.org/document/10016638
  
• Interrelationship of Manufacturing, Surface Morphology, and Properties of Titanium.
  Eberhard Kerscher, Stella Diederichs, Nafiseh Ghavidel, Andrej Keksel, Charlotte Kuhn, Ralf Müller, Jörg Seewig, Fábio J. P. Sousa, Jan C. Aurich and Hans Hasse
  Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
  DOI: 10.1007/978-3-031-35575-2_10
  https://link.springer.com/chapter/10.1007/978-3-031-35575-2_10
  
• Manufacturing of Areal Material Measures.
  Jörg Seewig, Georg von Freymann, Jan C. Aurich, Matthias Eifler, Julian Hering-Stratemeier, Katja Klauer-Dobrowolski, Jan C. Aurich and Hans Hasse
  Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
  DOI: 10.1007/978-3-031-35575-2_13
  https://link.springer.com/chapter/10.1007/978-3-031-35575-2_13
  
• Manufacturing-Morphology-Property Relationships for Biofilms.
  Roland Ulber, Sergiy Antonyuk, Jan C. Aurich, Tilmann Beck, Mustafa Bozoglu, Georg von Freymann, Sonja Kieren-Ehses, Christine Müller-Renno, Kai Muffler, Andrea Schmeckebier, Clarissa Schönecker, Jörg Seewig, Marek Smaga, Judith Stiefelmaier, Dorina Strieth, Ahmed Zayed, Christiane Ziegler, Sebastian Zimmermann, Jan C. Aurich and Hans Hasse
  Component Surfaces : Manufacturing-Morphology-Property Relationships, (2023)
  DOI: 10.1007/978-3-031-35575-2_17
  https://link.springer.com/chapter/10.1007/978-3-031-35575-2_17
  
• Model of rough surfaces with Gaussian processes.
  Arsalan Jawaid and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 11, Nr. 1, S. 1-9. (2023)
  DOI: 10.1088/2051-672X/acbe55
  https://iopscience.iop.org/article/10.1088/2051-672X/acbe55
  
• Robust surface profile envelope estimation using a beam-surface contact model.
  Tycho Groche and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 11, Nr. 1, S. 1-7. (2023)
  DOI: 10.1088/2051-672X/acb806
  https://iopscience.iop.org/article/10.1088/2051-672X/acb806
  
• Scientific modeling of optical 3D measuring devices based on GPU-accelerated ray tracing using the NVIDIA OptiX Engine.
  Andrej Keksel, Samuel Schmidt, Dietrich Beck and Jörg Seewig
  Modeling Aspects in Optical Metrology IX : 26-28 June 2023, Munich, Germany, (2023)
  DOI: 10.1117/12.2673777
  
• Sparse surface profile reconstruction from scattering light distributions.
  Tycho Groche, Jörg Seewig, Viktor Follmann and Julian Uebel
  Optical Measurement Systems for Industrial Inspection XIII : 26-29 June 2023, Munich, Germany, (2023)
  DOI: 10.1117/12.2673175
  https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12618/2673175/Sparse-surface-profile-reconstruction-from-scattering-light-distributions/10.1117/12.2673175.short
  
• Sub-zero milling of Ti-6Al-4V—impact of the cutting parameters on the resulting forces, tool wear, and surface quality.
  Kevin Gutzeit, Georgis Bulun, Gerhard Stelzer, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  International Journal of Advanced Manufacturing Technology, Vol. 126, Nr. 7, S. 3367-3381. (2023)
  DOI: 10.1007/s00170-023-11334-z
  https://link.springer.com/article/10.1007/s00170-023-11334-z
  
• Depth-resolved characterization of cryogenic hard turned surface layer of AISI 52100 by X-ray diffraction and scanning electron microscopy investigations.
  Werner Ankener, Marek Smaga, Julian Uebel, Jörg Seewig, Felix Grossmann, Stephan Basten, Benjamin Kirsch, Jan C. Aurich and Tilmann Beck
  Procedia CIRP, Vol. 108, S. 66-71. (2022)
  DOI: 10.1016/j.procir.2022.03.015
  https://www.sciencedirect.com/science/article/pii/S2212827122004954?via%3Dihub
  
• Determination of the characteristics of a self-built coherence scanning interferometer with a universal calibration artefact.
  Matthias Eifler, Julian Hering, Georgis Bulun, Georg von Freymann and Jörg Seewig
  Interferometry XXI : 24-25 August 2022, San Diego, California, United States, (2022)
  DOI: 10.1117/12.2633483
  
• Hand-Guided Mobile Terahertz 3D Imaging Platform with Aspherical Telecentric f-θ Optics.
  Shiva Mohammadzadeh, Andreas Keil, Sven Leuchs, Christian Krebs, Dirk Nüßler, Jörg Seewig and Fabian Friederich
  2021 18th European Radar Conference (EuRAD), (2022)
  DOI: 10.23919/EuRAD50154.2022.9784526
  https://ieeexplore.ieee.org/document/9784526
  
• Improving multi-photon lithography with machine learning.
  Julian Hering, Nicolas Lang, Matthias Eifler, Andrej Keksel, Jörg Seewig and Georg von Freymann
  Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XV : 22-27 January 2022, San Francisco, California, United States : 20-24 February 2022, online, (2022)
  DOI: 10.1117/12.2607238
  
• Investigation of the surface integrity when cryogenic milling of Ti-6Al-4V using a sub-zero metalworking fluid.
  Kevin Gutzeit, Georgis Bulun, Gerhard Stelzer, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 108, S. 25-30. (2022)
  DOI: 10.1016/j.procir.2022.03.010
  https://www.sciencedirect.com/science/article/pii/S221282712200484X?via%3Dihub
  
• Parameter Identification of an Abrasive Manufacturing Process With Machine Learning of Measured Surface Topography Information.
  Samuel Schmidt, Matthias Eifler, Jan Cedric Issel, Kristin Miriam de Payrebrune, Felix Ströer, Abdullah Karatas and Jörg Seewig
  Journal of Computing and Information Science in Engineering, Vol. 22, Nr. 4, S. 1-15. (2022)
  DOI: 10.1115/1.4053670
  https://asmedigitalcollection.asme.org/computingengineering/article-abstract/22/4/041010/1133476/Parameter-Identification-of-an-Abrasive?redirectedFrom=fulltext
  
• Predictive modelling of cryogenic hard turning of AISI 52100 based on response surface methodology for the use in soft sensors.
  Felix Grossmann, Stephan Basten, Benjamin Kirsch, Werner Ankener, Marek Smaga, Tilmann Beck, Julian Uebel, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 108, S. 270-275. (2022)
  DOI: 10.1016/j.procir.2022.04.070
  https://www.sciencedirect.com/science/article/pii/S2212827122005327?via%3Dihub
  
• Active Noise Control in Commercial Vehicles.
  Tycho Groche and Jörg Seewig
  Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
  DOI: 10.1007/978-3-658-29717-6_19
  https://link.springer.com/chapter/10.1007/978-3-658-29717-6_19
  
• Adaptive IIR Filtering For Online System Identification With Stability Monitoring.
  Jean Oscard Domguia Teto and Jörg Seewig
  2021 The 9th International Conference on Control, Mechatronics and Automation : ICCMA 2021 : University of Luxembourg, November 11-14, 2021 (2021) [International Conference on Control, Mechatronics and Automation (9. : 2021 : Online)], (2021)
  DOI: 10.1109/ICCMA54375.2021.9646182
  https://ieeexplore.ieee.org/document/9646182
  
• Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation.
  Katja Klauer, Matthias Eifler, Benjamin Kirsch, Volker Böß, Jörg Seewig and Jan C. Aurich
  International Journal of Advanced Manufacturing Technology, Vol. 116, Nr. 9, S. 3087-3102. (2021)
  DOI: 10.1007/s00170-021-07629-8
  https://link.springer.com/article/10.1007%2Fs00170-021-07629-8
  
• Condition Monitoring for Agricultural Vehicles using Magnetoresistive Sensors.
  Rolf Slatter, Paaranan Sivasothy and Jörg Seewig
  Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
  DOI: 10.1007/978-3-658-29717-6_25
  https://link.springer.com/chapter/10.1007/978-3-658-29717-6_25
  
• Define and measure the dimensional accuracy of two-photon laser lithography based on its instrument transfer function.
  Gaoliang Dai, Xiukun Hu, Julian Hering, Matthias Eifler, Jörg Seewig and Georg von Freymann
  Journal of Physics: Photonics, Vol. 3, Nr. 3, S. 1-10. (2021)
  DOI: 10.1088/2515-7647/abfaa7
  https://iopscience.iop.org/article/10.1088/2515-7647/abfaa7
  
• Development of a condition monitoring approach as a product-service system for agricultural machinery.
  Paaranan Sivasothy, Dani Bechev, Jörg Seewig and Bernd Sauer
  Commercial vehicle technology 2020/2021 : proceedings of the 6th Commercial Vehicle Technology Symposium, (2021)
  DOI: 10.1007/978-3-658-29717-6_31
  https://link.springer.com/chapter/10.1007/978-3-658-29717-6_31
  
• Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling.
  Katja Klauer, Nicolas Altherr, Matthias Eifler, Benjamin Kirsch, Volker Böß, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 102, S. 109-114. (2021)
  DOI: 10.1016/j.procir.2021.09.019
  https://www.sciencedirect.com/science/article/pii/S2212827121007629?via%3Dihub
  
• Metrological characteristics of material measures depending on manufacturing parameters in direct laser writing and external stress factors.
  Katja Gross, Matthias Eifler, Julian Hering, Georg von Freymann and Jörg Seewig
  Optical Measurement Systems for Industrial Inspection XII : 21-25 June 2021, online only, Germany, (2021)
  DOI: 10.1117/12.2591655
  https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11782/2591655/Metrological-characteristics-of-material-measures-depending-on-manufacturing-parameters-in/10.1117/12.2591655.short
  
• New material measure for the calibration of areal-optical measuring instruments and its demands on fabrication.
  Julian Hering, Matthias Eifler, Xiukun Hu, Gaoliang Dai, Jörg Seewig and Georg von Freymann
  Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIV : 6-11 March 2021, online only, United States, (2021)
  DOI: 10.1117/12.2579635
  
• Physical Modeling of Full-Field Time-Domain Optical Coherence Tomography.
  Andrej Keksel, Georgis Bulun, Matthias Eifler, Anis Idrizovic and Jörg Seewig
  Open Access Series in Informatics, Vol. 89, S. 1-22. (2021)
  DOI: 10.4230/OASIcs.iPMVM.2020.14
  https://drops.dagstuhl.de/opus/volltexte/2021/13763/
  
• Stabilization of Nonlinear Continuous Systems Based on Discrete Integrator Backstepping.
  Jean Oscard Domguia Teto and Jörg Seewig
  2021 The 9th International Conference on Control, Mechatronics and Automation : ICCMA 2021 : University of Luxembourg, November 11-14, 2021 [International Conference on Control, Mechatronics and Automation (9. : 2021 : Online)], (2021)
  DOI: 10.1109/ICCMA54375.2021.9646216
  https://ieeexplore.ieee.org/document/9646216
  
• Towards a continuous frequency band chirp material measure for surface topography measuring instrument calibration.
  Matthias Eifler, Julian Hering, Andrej Keksel, Georg von Freymann and Jörg Seewig
  Optical Measurement Systems for Industrial Inspection XII : 21-25 June 2021, online only, Germany, (2021)
  DOI: 10.1117/12.2591935
  
• Traceable functional characterization of surface topography with angular-resolved scattering light measurement.
  Matthias Eifler, Boris Brodmann, Poul-Erik Hansen and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 9, Nr. 3, S. 1-16. (2021)
  DOI: 10.1088/2051-672X/ac2031
  https://iopscience.iop.org/article/10.1088/2051-672X/ac2031/meta
  
• A model of confocal microscopy measurements combining empirical and physical properties.
  Andrej Keksel, Matthias Eifler and Jörg Seewig
  Measurement Science and Technology, Nr. 32/2, (2020)
  DOI: 10.1088/1361-6501/abbe3a
  https://iopscience.iop.org/article/10.1088/1361-6501/abbe3a
  
• Comparison of material measures for areal surface topography measuring instrument calibration.
  Matthias Eifler, Julian Hering, Jörg Seewig, Richard K. Leach, Georg von Freymann, Xiukun Hu and Gaoliang Dai
  Surface Topography: Metrology and Properties, Nr. 8/2, (2020)
  DOI: 10.1088/2051-672X/ab92ae
  https://iopscience.iop.org/article/10.1088/2051-672X/ab92ae
  
• Crossing-The-Line Segmentation as a Basis for Rsm and Rc Evaluation.
  Jörg Seewig, Paul J. Scott, Matthias Eifler, Bastian Barwick and Dorothee Hüser
  Surface Topography: Metrology and Properties, Nr. 8/2, (2020)
  DOI: 10.1088/2051-672X/ab958c
  https://iopscience.iop.org/article/10.1088/2051-672X/ab958c
  
• Determination of the surface topography of ball end micro milled material measures.
  Katja Groß, Matthias Eifler, Katja Klauer, Katharina Huttenlochner, Benjamin Kirsch, Christiane Ziegler, Jan C. Aurich and Jörg Seewig
  Engineering Science and Technology, an International Journal, (2020)
  DOI: 10.1016/j.jestch.2020.08.005
  https://www.sciencedirect.com/science/article/pii/S2215098620312052?via%3Dihub
  
• Forecast of the fatigue crack initiation site of commercially pure Titanium miniature specimens with local surface topography data.
  Luisa Böhme, Felix Ströer, Andrej Keksel, Jörg Seewig and Eberhard Kerscher
  MATEC Web of Conferences, Vol. 321, S. 1-9. (2020)
  DOI: 10.1051/matecconf/202032111008
  https://www.matec-conferences.org/articles/matecconf/abs/2020/17/matecconf_ti2019_11008/matecconf_ti2019_11008.html
  
• HoloPort – Submikrometergenau 3D-Messen in der Werkzeugmaschine [HoloPort – Submicron 3D measuring in the machine tool].
  Tobias Seyler, Johannes Engler, Markus Fuchs, Tobias Beckmann, Markus Fratz, Alexander Bertz, Daniel Carl, Viktor Grün, Rainer Börret, Felix Ströer and Jörg Seewig
  Technisches Messen, Vol. 87, Nr. 3, S. 210-221. (2020)
  DOI: 10.1515/teme-2019-0134
  https://www.degruyter.com/view/journals/teme/87/3/article-p210.xml?rskey=WH1wq4&result=3
  
• ISOBUS Simulatorforsmall and medium-scale manufacturers and farmers.
  Marc-Alexandre Favier, Yann Le Chevanton, Amélien Marchal, Vyndell Michael, Yaxu Xie, Runmao Zhao and Jörg Seewig
  Informatik in der Land-, Forst- und Ernährungswirtschaft : Fokus: Digitalisierung für Mensch, Umwelt und Tier : Referate der 40. GIL-Jahrestagung, 17.-18. Februar 2020 Campus Weihenstephan, Freising [GIL-Jahrestagung (40. : 2020 : Freising)], (2020)
  
• In-process and ex-situ measurement techniques for the characterization of surface conditions during cryogenic hard turning of AISI 52100 [In-process- und ex-situ-Messverfahren zur Charakterisierung des Randschichtzustands beim kryogenen Hartdrehen von AISI 52100].
  Julian Uebel, Werner Ankener, Stephan Basten, Marek Smaga, Benjamin Kirsch, Jörg Seewig, Tilmann Beck and Jan C. Aurich
  Technisches Messen, Vol. 87, Nr. 11, S. 694-703. (2020)
  DOI: 10.1515/teme-2020-0053
  https://www.degruyter.com/view/journals/teme/ahead-of-print/article-10.1515-teme-2020-0053/article-10.1515-teme-2020-0053.xml
  
• Influence of different cooling strategies during hard turning of AISI 52100 - part I: thermo-mechanical load, tool wear, surface topography and manufacturing accuracy.
  Stephan Basten, Benjamin Kirsch, Werner Ankener, Marek Smaga, Tilmann Beck, Julian Uebel, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 87, S. 77-82. (2020)
  DOI: 10.1016/j.procir.2020.02.085
  https://www.sciencedirect.com/science/article/pii/S2212827120302110?via%3Dihub
  
• Influence of different cooling strategies during hard turning of AISI 52100 – part II: characterization of the surface and near surface microstructure morphology.
  Werner Ankener, Julian Uebel, Stephan Basten, Marek Smaga, Benjamin Kirsch, Jörg Seewig, Jan C. Aurich and Tilmann Beck
  Procedia CIRP, Vol. 87, S. 119-124. (2020)
  DOI: 10.1016/j.procir.2020.02.094
  https://www.sciencedirect.com/science/article/pii/S2212827120302201?via%3Dihub
  
• Lagerung UP-gedrehter Kalibriernormale – Einfluss der Lagerbedingungen auf die Eigenschaften der Kalibriernormale.
  Katja Klauer, Matthias Eifler, Jörg Hartig, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  wt Werkstattstechnik online, Vol. 110, Nr. 11-12, S. 772-778. (2020)
  DOI: 10.37544/1436-4980-2020-11-12-36
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2020-11-12/wt-werkstattstechnik-online-jahrgang-110-2020-heft-11-12?page=1
  
• Micro milling of areal material measures –Study on surface generation for different up and down milling strategies.
  Katja Klauer, Matthias Eifler, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 87, S. 13-18. (2020)
  DOI: 10.1016/j.procir.2020.02.073
  https://www.sciencedirect.com/science/article/pii/S2212827120301992?via%3Dihub
  
• Performance specification of areal surface texture instruments exemplified by a self-built WLI.
  Georgis Bulun, Matthias Eifler, Julian Hering, Georg von Freymann, Jörg Seewig, Michael B. North Morris, Katherine Creath and Rosario Porras-Aguilar
  Interferometry XX : 24 August-4 September 2020, online only, United States [Interferometry (Veranstaltung : 2020 : Online)], (2020)
  DOI: 10.1117/12.2567666
  
• Performance verification of areal surface texture measuring instruments with the Sk-parameters.
  Matthias Eifler, Katja Klauer, Benjamin Kirsch, Jan C. Aurich and Jörg Seewig
  Measurement, Nr. 173, (2020)
  DOI: 10.1016/j.measurement.2020.108550
  https://www.sciencedirect.com/science/article/abs/pii/S0263224120310745
  
• Reference Tracking of Dynamic System Using Prefilter and Integral Extension.
  Jean Oscard Domguia Teto and Jörg Seewig
  IOP Conference Series: Materials Science and Engineering, Vol. 922, Nr. 1, (2020)
  DOI: 10.1088/1757-899X/922/1/012001
  https://iopscience.iop.org/article/10.1088/1757-899X/922/1/012001
  
• Surface conditioning in machining processes [Oberflächenkonditionierung in der Zerspanung].
  Volker Schulze, Frederik Zanger, Benedict Stampfer, Jörg Seewig, Julian Uebel, Andreas Zabel, Bernd Wolter and David Böttger
  Technisches Messen, Vol. 87, Nr. 11, S. 661-673. (2020)
  DOI: 10.1515/teme-2020-0044
  https://www.degruyter.com/view/journals/teme/ahead-of-print/article-10.1515-teme-2020-0044/article-10.1515-teme-2020-0044.xml
  
• Virtual topography measurement with transfer functions derived by fitted time series models.
  Andrej Keksel, Anna-Pia Lohfink, Matthias Eifler, Christoph Garth and Jörg Seewig
  Measurement Science and Technology, Nr. 31/5, (2020)
  DOI: 10.1088/1361-6501/ab5131
  https://iopscience.iop.org/article/10.1088/1361-6501/ab5131
  
• Zwei-Photonen Laserlithografie zur individuellen Herstellung von Normalen für die optische Rauheitsmesstechnik.
  Jörg Seewig, Matthias Eifler, Julian Hering, Georg von Freymann, Sophie Gröger and Marco Weißgerber
  Sächsisches Geometriesymposium 2020 : Tolerierung - Fertigung - Messtechnik - Daten : Tagungsband [Sächsisches Geometriesymposium (2020 : Chemnitz)], (2020)
  
• An algorithm for measuring the hydraulic jump height of an airfoil in a water table.
  Ian C. Garretson, Francois Maurice Torner, Jörg Seewig and Barbara Sabine Linke
  Measurement, (2019)
  DOI: 10.1016/j.measurement.2019.106854
  https://www.sciencedirect.com/science/article/pii/S0263224119307110
  
• Anwendungsfall BHN/Lenze/Schaeffler.
  Daniel Olivotti, Hristo Apostolov, Dani Bechev, Horst Brehm, Georgis Bulun, Christian Donges, Sonja Dreyer, Thomas Eickhoff, Matthias Fischer, Claudia Genske, Jens C. Göbel, Simon Graf, Michael Grethler, Julian Imwalle, Andrej Keksel, Markus Kiele-Dunsche, Ralf Mattukat, Rolf Rettinger, Bernd Sauer, Jörg Seewig, Paaranan Sivasothy, Heiko Stichweh and Frank Zehsel
  Entwicklung datenbasierter Produkt-Service Systeme, (2019)
  DOI: 10.1007/978-3-662-59643-2_8
  https://link.springer.com/chapter/10.1007/978-3-662-59643-2_8
  
• Anwendungsfall GRIMME.
  Paaranan Sivasothy, Jan C. Aurich, Dani Bechev, Horst Brehm, Georgis Bulun, Claudia Glenske, Michael Grethler, Christoph F. Herder, Julian Imwalle, Andrej Keksel, Patrick Kölsch, Ralf Mattukat, Gerald Wessel, Bernd Sauer, Jörg Seewig, Frank Zeihsel and Viviane Zimmermann
  Entwicklung datenbasierter Produkt-Service Systeme : ein Ansatz zur Realisierung verfügbarkeitsorientierter Geschäftsmodelle, (2019)
  DOI: 10.1007/978-3-662-59643-2_6
  https://link.springer.com/chapter/10.1007/978-3-662-59643-2_6
  
• Approach for the observation of surface conditions in-process by soft sensors during cryogenic hard turning.
  Julian Uebel, Felix Ströer, Stephan Basten, Werner Ankener, Hendrik Hotz, Lukas Heberger, Gerhard Stelzer, Benjamin Kirsch, Marek Smaga, Jörg Seewig, Jan C. Aurich and Tilmann Beck
  Procedia CIRP, Vol. 81, S. 1260-1265. (2019)
  DOI: 10.1016/j.procir.2019.03.304
  https://www.sciencedirect.com/science/article/pii/S2212827119306092
  
• Ball end micro milling of areal material measures: influence of the tilt angle on the resulting surface topography.
  Katja Klauer, Matthias Eifler, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Production Engineering, Vol. 14, Nr. 2, S. 239-252. (2019)
  DOI: 10.1007/s11740-019-00943-x
  https://link.springer.com/article/10.1007%2Fs11740-019-00943-x
  
• Comparison of material measures for the determination of transfer characteristics of surface topography measuring instruments.
  Matthias Eifler, Andrej Keksel and Jörg Seewig
  Surface Topography: Metrology and Properties, Nr. 7/1, (2019)
  DOI: 10.1088/2051-672X/ab0dc6
  https://iopscience.iop.org/article/10.1088/2051-672X/ab0dc6
  
• Correlation between different cutting conditions, surface roughness and dimensional accuracy when ball end micro milling material measures with freeform surfaces.
  Katja Klauer, Matthias Eifler, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Machining Science and Technology, Vol. 24, Nr. 3, S. 446-464. (2019)
  DOI: 10.1080/10910344.2019.1698611
  https://www.tandfonline.com/doi/abs/10.1080/10910344.2019.1698611?journalCode=lmst20
  
• Design and machining of a calibration artefact for an angular-resolved scattering light sensor.
  Katja Klauer, Matthias Eifler, Gerhard Stelzer, Benjamin Kirsch, Jörg Seewig, Jan C. Aurich, Richard Leach, D. Billington, C. Nisbet and D. Phillips
  Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology : June 3rd-7th June 2019, Bilbao, ES [European Society for Precision Engineering and Nanotechnology. International Conference & Exhibition (19. : 2019 : Bilbao)], (2019)
  
• Development of a Convolutional Autoencoder Using Deep Neuronal Networks for Defect Detection and Generating Ideal References for Cutting Edges.
  Abdullah Karatas, Dorothea Kölsch, Samuel Schmidt, Matthias Eifler, Jörg Seewig, Peter Lehmann, Wolfgang Osten and Armando Albertazzi Gonçalves
  Optical Measurement Systems for Industrial Inspection XI [Optical Measurement Systems for Industrial Inspection (Veranstaltung : 11. : 2019 : München)], (2019)
  DOI: 10.1117/12.2525882
  
• Effects of vibratory finishing of 304 stainless steel samples on areal roughness parameters: A correlational analysis for anisotropy parameters.
  Matthias Eifler, Ian C. Garretson, Barbara Sabine Linke, Jayanti Das, Francois Maurice Torner and Jörg Seewig
  Journal of Materials Processing Technology, (2019)
  DOI: 10.1016/j.jmatprotec.2019.116256
  https://www.sciencedirect.com/science/article/pii/S0924013619302201
  
• Entwicklung eines akustischen Füllstandsensors für mobile Schüttgutsilos.
  Paaranan Sivasothy, Hüseyin Cavuldak, Vitali Rjasanzew and Jörg Seewig
  20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019, (2019)
  DOI: 10.5162/sensoren2019/P2.3
  
• Entwicklung intelligenter, kommunikationsfähiger Komponenten.
  Paaranan Sivasothy, Dani Bechev, Horst Brehm, Georgis Bulun, Claudia Glenske, Julian Imwalle, Andrej Keksel, Ralf Mattukat, Bernd Sauer and Jörg Seewig
  Entwicklung datenbasierter Produkt-Service Systeme : ein Ansatz zur Realisierung verfügbarkeitsorientierter Geschäftsmodelle, (2019)
  DOI: 10.1007/978-3-662-59643-2_4
  https://link.springer.com/chapter/10.1007/978-3-662-59643-2_4
  
• Flächenhafte Messgeräte mit nur einer Probe kalibrieren.
  Matthias Eifler, Julian Hering, Felix Ströer, Jörg Seewig and Georg von Freymann
  Mikroproduktion, Vol. 2019, Nr. 02, S. 22-25. (2019)
  http://www.mikroproduktion.com/fachzeitschrift.html
  
• Implementation of a Dynamic Product Development Method for Agricultural Engineering Based on Virtual Prototypes.
  Paaranan Sivasothy, Georgis Bulun, Jörg Seewig and J. Imwalle
  Land.Technik AgEng 2019 : 77th International Conference on Agricultural Engineering : November 8th-9th 2019, Hannover, (2019)
  DOI: 10.51202/9783181023617-273
  
• Micro Milling of Areal Material Measures: Influence of the Manufacturing Parameters on the Surface Quality = Mikrofräsen Flächenhafter Kalibriernormale: Einfluss Der Fertigungsparameter auf die Oberflächenqualität.
  Katja Klauer, Matthias Eifler, Benjamin Kirsch, Jörg Seewig, Jan C. Aurich, Jens Peter Wulfsberg, Wolfgang Hintze and Bernd-Arno Behrens
  Production at the Leading Edge of Technology, (2019)
  DOI: 10.1007/978-3-662-60417-5_26
  
• Micro hardness determination on a rough surface by using combined indentation and topography measurements.
  Luisa Böhme, Andrej Keksel, Felix Ströer, Martin Bohley, Sonja Kieren-Ehses, Benjamin Kirsch, Jan C. Aurich, Jörg Seewig and Eberhard Kerscher
  Surface Topography: Metrology and Properties, Nr. 7/4, (2019)
  DOI: 10.1088/2051-672X/ab518a
  https://iopscience.iop.org/article/10.1088/2051-672X/ab518a
  
• Model-based design of areal material measures with component surfaces.
  Matthias Eifler, Katja Klauer, Jörg Seewig, Benjamin Kirsch and Jan C. Aurich
  Surface Topography: Metrology and Properties, Nr. 7/4, (2019)
  DOI: 10.1088/2051-672X/ab5c83
  https://iopscience.iop.org/article/10.1088/2051-672X/ab5c83/meta
  
• Realisierung verfügbarkeitsorientierter Geschäftsmodelle in der Investitionsgüterindustrie.
  Thomas Eickhoff, Paaranan Sivasothy, Patrick Kölsch, Jan C. Aurich, Jörg Seewig and Jens C. Göbel
  Dienstleistungsinnovationen durch Digitalisierung. Band 1., Geschäftsmodelle - Methoden - Umsetzungsbeispiele, (2019)
  DOI: 10.1007/978-3-662-62144-8_9
  https://link.springer.com/chapter/10.1007/978-3-662-62144-8_9
  
• Rk material measure: A model based design [Rk-Normal – Eine modellbasierte Auslegung].
  Jörg Seewig, Matthias Eifler, Dorothee Hüser and Rudolf Meess
  Technisches Messen, Vol. 86, Nr. 9, S. 478-486. (2019)
  DOI: 10.1515/teme-2019-0091
  https://www.degruyter.com/view/j/teme.2019.86.issue-9/teme-2019-0091/teme-2019-0091.xml
  
• User-Oriented Evaluation of the Metrological Characteristics of Areal Surface Topography Measuring Instruments.
  Matthias Eifler, Felix Ströer, Julian Hering, Georg von Freymann, Jörg Seewig, Peter Lehmann, Wolfgang Osten and Armando Albertazzi Gonçalves
  Optical Measurement Systems for Industrial Inspection XI [Optical Measurement Systems for Industrial Inspection (Veranstaltung : 11. : 2019 : München)], (2019)
  DOI: 10.1117/12.2526005
  
• 3D printing of material measures for areal surface texture (Conference Presentation).
  Matthias Eifler, Julian Hering, Georg von Freymann and Jörg Seewig
  3D Printed Optics and Additive Photonic Manufacturing : 23-24 April 2018, Strasbourg, France, (2018)
  DOI: 10.1117/12.2307560
  https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10675/2307560/3D-printing-of-material-measures-for-areal-surface-texture-Conference/10.1117/12.2307560.short
  
• Application of function-oriented roughness parameters using confocal microscopy.
  Katja Klauer, Matthias Eifler, Jörg Seewig, Benjamin Kirsch and Jan C. Aurich
  Engineering Science and Technology, an International Journal, Vol. 21, Nr. 3, S. 302-313. (2018)
  DOI: 10.1016/j.jestch.2018.04.004
  https://www.sciencedirect.com/science/article/pii/S2215098618302246
  
• Bayesian approach for circle fitting including prior knowledge.
  Andrej Keksel, Felix Ströer and Jörg Seewig
  Surface Topography: Metrology and Properties, Nr. 6/3, (2018)
  DOI: 10.1088/2051-672X/aad2b4
  https://iopscience.iop.org/article/10.1088/2051-672X/aad2b4/meta
  
• Calibration sample for arbitrary metrological characteristics of optical topography measuring instruments.
  Matthias Eifler, Julian Hering, Georg von Freymann and Jörg Seewig
  Optics Express, Vol. 26, Nr. 13, (2018)
  DOI: 10.1364/OE.26.016609
  https://www.osapublishing.org/oe/abstract.cfm?uri=oe-26-13-16609
  
• Combined development and test of product-service systems in early product development stages for customized, availability-oriented business models in the capital goods industry..
  Felix Ströer, Paaranan Sivasothy, Karl-Gerhard Faißt, Hristo Apostolov, Thomas Eickhoff, Dani Bechev, Georgis Bulun, Jörg Seewig, Martin Eigner and Bernd Sauer
  Procedia CIRP, Vol. 72, S. 714-719. (2018)
  DOI: 10.1016/j.procir.2018.03.246
  https://www.sciencedirect.com/science/article/pii/S2212827118304177
  
• Das faire Datenblatt – Der heutige Stand und die Zukunft.
  Jörg Seewig, Matthias Eifler, W. Bauer and Georg Wiora
  6. VDI-Fachtagung Optische Messung von Funktionsflächen 2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Frankenthal bei Mannheim, 06. und 07. Juni 2018, (2018)
  DOI: 10.51202/9783181023266-81
  https://elibrary.vdi-verlag.de/10.51202/9783181023266/optische-messung-von-funktionsflaechen-2018-multisensorik-fertigungsmesstechnik-2018?page=1
  
• Extensive microstructural quality control inside a machine tool using multiwavelength digital holography.
  Tobias Seyler, Markus Fratz, Tobias Beckmann, Alexander Bertz, Daniel Carl, Viktor Grün, Rainer Börret, Felix Ströer, Jörg Seewig, Michal Józwik, Leszek R. Jaroszewicz and Malgorzata Kujawińska
  Speckle 2018: VII International Conference on Speckle Metrology : 10-12 September 2018, Janów Podlaski, Poland [International Conference on Speckle Metrology (7. : 2018 : Janów Podlaski)], (2018)
  DOI: 10.1117/12.2319750
  
• Generating ideal reference geometry for cutting edges.
  Abdullah Karatas and Jörg Seewig
  Journal of Physics: Conference Series, (2018)
  DOI: 10.1088/1742-6596/1065/14/142017
  http://iopscience.iop.org/article/10.1088/1742-6596/1065/14/142017
  
• Konzept zur Oberflächenkonditionierung beim kryogenen Hartdrehen [Concept for Targeted Surface Layer Conditioning in Cryogenic Hard Turning].
  Hendrik Hotz, Felix Ströer, Lukas Heberger, Benjamin Kirsch, Marek Smaga, Tilmann Beck, Jörg Seewig and Jan C. Aurich
  Zeitschrift für wirtschaftlichen Fabrikbetrieb, (2018)
  DOI: 10.3139/104.111951
  https://www.degruyter.com/document/doi/10.3139/104.111951/html
  
• Manufacturing of the ISO 25178-70 material measures with direct laser writing: A feasibility study.
  Matthias Eifler, Julian Hering, Georg von Freymann and Jörg Seewig
  Surface Topography: Metrology and Properties, Nr. 6/2, (2018)
  DOI: 10.1088/2051-672X/aabe18
  https://iopscience.iop.org/article/10.1088/2051-672X/aabe18/meta
  
• Micro-milling of areal material measures - influences on the resulting surface topography..
  Matthias Eifler, Katja Klauer, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Procedia CIRP, Vol. 71, S. 122-127. (2018)
  DOI: 10.1016/j.procir.2018.05.083
  https://www.sciencedirect.com/science/article/pii/S221282711830711X
  
• Mobile Sensor Concept for Acoustic Level Estimation in Bulk Solids Silos.
  Lukas Anslinger, Paaranan Sivasothy, Francois Maurice Torner and Jörg Seewig
  2018 IEEE Sensors Applications Symposium : March 12-14, 2018, Seoul, Korea : 2018 symposium proceedings, (2018)
  DOI: 10.1109/SAS.2018.8336760
  https://ieeexplore.ieee.org/document/8336760
  
• Model Selection and Quality Estimation of Time Series Models for Artificial Technical Surface Generation..
  Matthias Eifler, Felix Ströer, Sebastian Rief and Jörg Seewig
  Technologies, Vol. 6, Nr. 1, S. 1-22. (2018)
  DOI: 10.3390/technologies6010003
  https://www.mdpi.com/2227-7080/6/1/3
  
• Modeling of topography measuring instrument transfer functions by time series models.
  Andrej Keksel, Matthias Eifler and Jörg Seewig
  Measurement Science and Technology, Nr. 29/9, (2018)
  DOI: 10.1088/1361-6501/aad467
  https://iopscience.iop.org/article/10.1088/1361-6501/aad467/meta
  
• Praxisgerechte Kalibrierung nach ISO 25178-700 - Eine Übersicht.
  Jörg Seewig, Matthias Eifler and W. Bauer
  6. VDI-Fachtagung Optische Messung von Funktionsflächen 2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Frankenthal bei Mannheim, 06. und 07. Juni 2018, (2018)
  DOI: 10.51202/9783181023266-81
  https://elibrary.vdi-verlag.de/10.51202/9783181023266/optische-messung-von-funktionsflaechen-2018-multisensorik-fertigungsmesstechnik-2018?page=1
  
• System identification and control parameter optimization for a stylus profiler with exchangeable cantilevers.
  Felix Ströer, Katharina Trinkaus, Indek Raid and Jörg Seewig
  Engineering Science and Technology, an International Journal, Vol. 21, Nr. 1, S. 117-121. (2018)
  DOI: 10.1016/j.jestch.2018.02.012
  https://www.sciencedirect.com/science/article/pii/S2215098617313216?via%3Dihub
  
• Technical Realisation of Availability-Oriented Business Models for Potato Harvesters by Using aMR Sensors.
  Paaranan Sivasothy, Andrej Keksel and Jörg Seewig
  IEEE SENSORS 2018 : October 28-31, 2018, Pullman Aerocity, New Delhi, India : 2018 conference proceedings (2018), (2018)
  DOI: 10.1109/ICSENS.2018.8630306
  https://ieeexplore.ieee.org/document/8630306
  
• Two-Photon Laser Lithography in Optical Metrology.
  Julian Hering, Matthias Eifler, Jörg Seewig, Georg von Freymann, Linda Hofherr and Christiane Ziegler
  Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI : 28-31 January 2018, San Francisco, California, United States, (2018)
  DOI: 10.1117/12.2289900
  
• Verschleiß von Raunormalen - Experimentelle Untersuchung zum Einfluss der taktilen Abtastung.
  Matthias Eifler, Katja Klauer, Raimund Volk, Stefan Feifel, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  wt Werkstattstechnik online, Vol. 108, Nr. 11-12, S. 749-754. (2018)
  DOI: 10.37544/1436-4980-2018-11-12-9
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2018-11-12/wt-werkstattstechnik-online-jahrgang-108-2018-heft-11-12
  
• Ageing of Roughness Artefacts – Impact on the Measurement Results.
  Katja Klauer, Matthias Eifler, Frank Schneider, Jörg Seewig, Jan C. Aurich, D. Billington and D. Phillips
  Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [European Society for Precision Engineering and Nanotechnology. International Conference (17. : 2017 : Hannover)], (2017)
  
• Alternative evaluation methods for roundness measurements.
  Dietrich Imkamp, Alessandro Gabbia and Jörg Seewig
  Engineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017. Presented at the Ilmenau Scientific Colloquium, (2017)
  https://www.db-thueringen.de/receive/dbt_mods_00033057
  
• An Approach for the Simulation of Ground and Honed Technical Surfaces for Training Classifiers.
  Sebastian Rief, Felix Ströer, Simon Kieß, Matthias Eifler and Jörg Seewig
  Technologies, Vol. 5, Nr. 4, S. 66-66. (2017)
  DOI: 10.3390/technologies5040066
  https://www.mdpi.com/2227-7080/5/4/66
  
• An Approach to the Assessment of Cam Form.
  Shan Lin, Otto Jusko, Frank Härtig, Jörg Seewig, D. Billington and D. Phillips
  Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [

  European Society for Precision Engineering and Nanotechnology. International Conference (17. : 2017 : Hannover)], (2017)
  

• Application of GPU-based, Highly Parallelized Algorithms for the Estimation of Electromagnetic Multi-Layer Interactions.
  Francois Maurice Torner, Abdullah Karatas, Matthias Eifler, Indek Raid, Jörg Seewig, Peter Lehmann, Wolfgang Osten and Armando Albertazzi Gonçalves
  Optical Measurement Systems for Industrial Inspection X : 26-29 June 2017, Munich, Germany [International Symposium on Optical Metrology (2017 : München)], (2017)
  DOI: 10.1117/12.2270257
  
• Calibration of Areal Surface Topography Measuring Instruments.
  Jörg Seewig, Matthias Eifler and Anand K. Asundi
  Fifth International Conference on Optical and Photonics Engineering : 4-7 April 2017, Singapore [International Conference on Optical and Photonics Engineering (2017 : Singapur)], (2017)
  DOI: 10.1117/12.2270533
  
• Dependency Graph Based on User Taxonomy and Related Parameters for More Efficient Collaborative Work.
  Franca Alexandra Rupprecht, Francois Maurice Torner, Jörg Seewig and Achim Ebert
  Applied Mechanics and Materials, Vol. 869, S. 195-211. (2017)
  DOI: 10.4028/www.scientific.net/AMM.869.195
  https://www.scientific.net/AMM.869.195
  
• Description and Evaluation of a Simplified Model to Simulate the Optical Behavior of an Angle-Resolved Scattered Light Sensor.
  Francois Maurice Torner, Gerhard Stelzer, Lukas Anslinger and Jörg Seewig
  Journal of Computing and Information Science in Engineering, Vol. 17, Nr. 2, (2017)
  DOI: 10.1115/1.4034386
  https://asmedigitalcollection.asme.org/computingengineering/article-abstract/17/2/021003/446468/Description-and-Evaluation-of-a-Simplified-Model?redirectedFrom=fulltext
  
• Development of a Sensor Prototype and Geometry Based Parameters for the Characterization of Riblets Using Angle-resolved Measurement Techniques.
  Francois Maurice Torner, Gerhard Stelzer, Felix Ströer and Jörg Seewig
  Procedia CIRP, Vol. 63, S. 8-13. (2017)
  DOI: 10.1016/j.procir.2017.03.358
  https://www.sciencedirect.com/science/article/pii/S221282711730673X?via%3Dihub
  
• Einflüsse der Oberflächenstruktur auf die Streuung von Rauheitskennwerten: Praxisrelevante Untersuchungen.
  Sebastian Rief, Jörg Seewig, Dorothee Hüser, Sophie Gröger and Marco Weißgerber
  XIV. Internationales Oberflächenkolloquium : 30.01.-01.02.2017 an der Technischen Universität Chemnitz : Tagungsband = XIV. International Colloquium on Surfaces [Internationales Oberflächenkolloquium (14. : 2017 : Chemnitz)], (2017)
  
• Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools.
  Peter A. Arrabiyeh, Martin Bohley, Felix Ströer, Benjamin Kirsch, Jörg Seewig and Jan C. Aurich
  Inventions, Vol. 2, Nr. 4, (2017)
  DOI: 10.3390/inventions2040029
  https://www.mdpi.com/2411-5134/2/4/29
  
• Fundamental Analysis of the Usability of an Angle-Resolved Scattered Light Sensor for Monitoring Vibratory Finishing Processes Based on Ray Tracing Simulations.
  Francois Maurice Torner, Jayanti Das, Gerhard Stelzer, Barbara Sabine Linke and Jörg Seewig
  Applied Mechanics and Materials, Vol. 869, S. 115-127. (2017)
  DOI: 10.4028/www.scientific.net/AMM.869.115
  https://www.scientific.net/AMM.869.115
  
• Grinding Energy Modeling Based on Friction, Plowing, and Shearing.
  Barbara Sabine Linke, Ian Garretson, Francois Maurice Torner and Jörg Seewig
  Journal of Manufacturing Science and Engineering, Vol. 139, Nr. 12, S. 1-11. (2017)
  DOI: 10.1115/1.4037239
  https://asmedigitalcollection.asme.org/manufacturingscience/article-abstract/139/12/121009/473150/Grinding-Energy-Modeling-Based-on-Friction-Plowing?redirectedFrom=fulltext
  
• Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C.
  Marek Smaga, Robert Skorupski, Patrick Mayer, Benjamin Kirsch, Jan C. Aurich, Indek Raid, Jörg Seewig, Jirí Man, Dietmar Eifler and Tilmann Beck
  Procedia Structural Integrity, Vol. 5, S. 989-996. (2017)
  DOI: 10.1016/j.prostr.2017.07.150
  https://www.sciencedirect.com/science/article/pii/S2452321617302627?via%3Dihub
  
• Ultrafast 3D High Precision Print of Micro Structures for Optical Instrument Calibration Procedures.
  Felix Ströer, Julian Hering, Matthias Eifler, Indek Raid, Georg von Freymann and Jörg Seewig
  Additive Manufacturing, Vol. 18, S. 22-30. (2017)
  DOI: 10.1016/j.addma.2017.09.001
  https://www.sciencedirect.com/science/article/pii/S221486041630344X?via%3Dihub
  
• A Model-Based Approach for the Calibration and Traceability of the Angle Resolved Scattering Light Sensor.
  Jörg Seewig, Matthias Eifler, Frank Schneider, Benjamin Kirsch and Jan C. Aurich
  Surface Topography: Metrology and Properties, Vol. 4, Nr. 2, (2016)
  DOI: 10.1088/2051-672X/4/2/024010
  https://iopscience.iop.org/article/10.1088/2051-672X/4/2/024010
  
• Design and Verification of Geometric Roughness Standards by Reverse Engineering.
  Jörg Seewig, Matthias Eifler, Frank Schneider and Jan C. Aurich
  Procedia CIRP, Vol. 45, S. 259-262. (2016)
  DOI: 10.1016/j.procir.2016.02.157
  https://www.sciencedirect.com/science/article/pii/S2212827116004418?via%3Dihub
  
• Ein mobiles zur Mikrodrallmessung geeignetes Messsystem und dessen Kalibrierung [A mobile measuring system and its calibration suited for micro lead measurements].
  Philipp Arnecke, Burkhard Boecker and Jörg Seewig
  Technisches Messen, Vol. 83, Nr. 6, S. 355-364. (2016)
  DOI: 10.1515/teme-2015-0127
  https://www.degruyter.com/document/doi/10.1515/teme-2015-0127/html
  
• Form error assessment of circular-arc cams.
  Shan Lin, Otto Jusko, Frank Härtig, Jörg Seewig, P. Bointon, Richard Leach and N. Southon
  Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen), (2016)
  
• Manufacturing of new roughness standards for the linearity of the vertical axis – Feasibility study and optimization.
  Matthias Eifler, Frank Schneider, Jörg Seewig, Benjamin Kirsch and Jan C. Aurich
  Engineering Science and Technology, an International Journal, Vol. 19, Nr. 4, S. 1993-2001. (2016)
  DOI: 10.1016/j.jestch.2016.06.009
  https://www.sciencedirect.com/science/article/pii/S2215098616301628?via%3Dihub
  
• Neue Anwendungen – Rauheitsmessung mit Computertomographie.
  Matthias Eifler, F. Ballach, H. Stoschus, Jörg Seewig, R. Christoph, F. Schneider and Jan C. Aurich
  Qualität und Zuverlässigkeit, Vol. 61, Nr. 1, S. 50-53. (2016)
  https://www.qz-online.de/a/fachartikel/neue-anwendungen-290901
  
• Procedure to Approximately Estimate the Uncertainty of Material Ratio Parameters Due to Inhomogeneity of Surface Roughness.
  Dorothee Hüser, Jonathan Hüser, Sebastian Rief, Jörg Seewig and Peter Thomsen-Schmidt
  Measurement Science and Technology, Vol. 27, Nr. 8, (2016)
  DOI: 10.1088/0957-0233/27/8/085005
  https://iopscience.iop.org/article/10.1088/0957-0233/27/8/085005
  
• Ti surface modification by cold spraying with TiO2 microparticles.
  Kilian Schmidt, Sebastian Buhl, Neda Davoudi, Claudia Godard, Rolf Merz, Indek Raid, Eberhard Kerscher, Michael Kopnarski, Christine Müller-Renno, Siegfried Ripperger, Jörg Seewig, Christiane Ziegler and Sergiy Antonyuk
  Surface and Coatings Technology, Vol. 309, S. 749-758. (2016)
  DOI: 10.1016/j.surfcoat.2016.10.091
  https://www.sciencedirect.com/science/article/pii/S025789721631088X?via%3Dihub
  
• Unsicherheit von Rauheitskennwerten in der Praxis – Untersuchung der Statistik der Oberfläche auf Zylinderlaufbahnen.
  Sebastian Rief and Jörg Seewig
  wt Werkstattstechnik online, Vol. 106, Nr. 11-12, S. 823-829. (2016)
  DOI: 10.37544/1436-4980-2016-11-12-45
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2016-11-12/wt-werkstattstechnik-online-jahrgang-106-2016-heft-11-12?page=1
  
• Calibration of Ellipso-Height-Topometry with Nanoscale Gratings of Varying Materials.
  Indek Raid, Matthias Eifler, Tatjana Kusnezowa and Jörg Seewig
  Optik, Vol. 126, Nr. 23, S. 4591-4596. (2015)
  DOI: 10.1016/j.ijleo.2015.08.093
  https://www.sciencedirect.com/science/article/pii/S0030402615008542?via%3Dihub
  
• Calibration of Z-Axis Linearity for Arbitrary Optical Topography Measuring Instruments.
  Matthias Eifler, Jörg Seewig, Julian Hering, Georg von Freymann, Peter Lehmann, Wolfgang Osten and Armando Albertazzi Gonçalves
  Optical Measurement Systems for Industrial Inspection IX : 22-25 June 2015, Munich, German, (2015)
  DOI: 10.1117/12.2190737
  
• Contamination of Roughness Artefacts – Impact on the Measurement Results.
  Matthias Eifler, Frank Schneider, Martin Bohley, Jan C. Aurich, Jörg Seewig and Richard Leach
  Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology (Euspen) [European Society for Precision Engineering and Nanotechnology. International Conference & Exhibition (15. : 2015 : Leuven)], (2015)
  https://www.euspen.eu/knowledge-base/ICE15-O3.9.pdf
  https://www.euspen.eu/product/15th-international-conference-proceedings/
  
• High-Voltage DC Trailing Cable Systems for Mobile Machinery.
  Jochen Barthel, Kilian Jung and Jörg Seewig
  IECON 2015 - Yokohama : 41st Annual Conference of the IEEE Industrial Electronics Society : November 9-12, 2015, Pacifico Yokohama, Yokohama, Japan, (2015)
  DOI: 10.1109/IECON.2015.7392254
  https://ieeexplore.ieee.org/document/7392254
  
• Modellbasierte Entwicklung eines Geometrienormals für pneumatische Abstandssensoren.
  Matthias Eifler, Patrick Schäfer and Jörg Seewig
  Technisches Messen, Vol. 82, Nr. 2, S. 85-93. (2015)
  DOI: 10.1515/teme-2014-0013
  https://www.degruyter.com/document/doi/10.1515/teme-2014-0013/html
  
• Nahe an Der Anwendung – Geometrienormale Zur Kalibrierung von Tastschnittgeräten.
  Jörg Seewig and Matthias Eifler
  Qualität und Zuverlässigkeit, Vol. 60, Nr. 3, S. 44-46. (2015)
  https://www.qz-online.de/a/fachartikel/nahe-an-der-anwendung-293794
  
• Nanomechanical Properties of the Sea-Water Bacterium Paracoccus Seriniphilus A Scanning Force Microscopy Approach.
  Neda Davoudi, Christine Müller-Renno, Christiane Ziegler, Indek Raid, Jörg Seewig, Christin Schlegel, Kai Muffler and Roland Ulber
  Biointerphases, Vol. 10, Nr. 1, (2015)
  DOI: 10.1116/1.4906862
  https://pubs.aip.org/avs/bip/article/10/1/019004/124465/Nanomechanical-properties-of-the-sea-water
  
• A Strategy for Micro-Twist Characterization on the Shaft in a Rotary Shaft Sealing System.
  Philipp Arnecke and Jörg Seewig
  International sealing conference: Innovative sealing technology - static and dynamic = Internationale Dichtungstagung [International Sealing Conference (18. : 2014 : Stuttgart)], (2014)
  
• Design of a Chromatic Fringe Projector for 3D Object Reconstruction.
  Francois Maurice Torner, Jörg Seewig, Thomas Fahlbusch, Günter Beichert and Thomas Böttner
  Fringe 2013 : 7th International Workshop on Advanced Optical Imaging and Metrology, (2014)
  DOI: 10.1007/978-3-642-36359-7_37
  https://link.springer.com/chapter/10.1007/978-3-642-36359-7_37
  
• Entwicklung eines Geometrienormals zur Kalibrierung von pneumatischen Abstandssensoren.
  Matthias Eifler, Patrick Schäfer and Jörg Seewig
  AHMT 2014 - Symposium des Arbeitskreises der Hochschullehrer für Messtechnik, (2014)
  DOI: 10.5162/AHMT2014/1.3
  
• Evolution of Wear on the Abrasive Tool during the Polishing of Porcelain Tile Using Morphological Space.
  Fábio José Pinheiro Sousa, Jörg Seewig, Catia Chiamulera, Orestes Estevam Alarcon and Walter Lindwolf Weingärtner
  Advanced Materials Research, Vol. 906, S. 293-302. (2014)
  DOI: 10.4028/www.scientific.net/AMR.906.293
  https://www.scientific.net/AMR.906.293
  
• Kinematische Simulation gedrehter Wellenlaufflächen – Funktionsorientierte Untersuchung des Einflusses der Prozessparameter auf Drallstrukturen.
  Indek Raid, Jörg Seewig, Daniel Frölich, Bernd Sauer, Patrick Mayer, Frank Schneider and Jan C. Aurich
  wt Werkstattstechnik online, Vol. 104, Nr. 5, S. 279-287. (2014)
  DOI: 10.37544/1436-4980-2014-5-279
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2014-5/wt-werkstattstechnik-online-jahrgang-104-2014-heft-5?page=1
  
• Stabilisierung von Rauheitskennwerten durch Ausblenden von Stördaten.
  Sebastian Pehnelt, Peter Dollinger, Jörg Seewig and Matthias Eifler
  MTZ : Motortechnische Zeitschrift, Vol. 75, Nr. 4, S. 52-57. (2014)
  DOI: 10.1007/s35146-014-0317-5
  https://link.springer.com/article/10.1007/s35146-014-0317-5
  
• Unambiguous Evaluation of a Chirp Measurement Standard.
  Jörg Seewig, Matthias Eifler and Georg Wiora
  Surface Topography: Metrology and Properties, Vol. 2, Nr. 4, (2014)
  DOI: 10.1088/2051-672X/2/4/045003
  https://iopscience.iop.org/article/10.1088/2051-672X/2/4/045003
  
• Vergleichbare Ergebnisse – Rauheitsmessung Taktil Oder Optisch?.
  Felix Ströer, Jörg Seewig and Frank Depiereux
  Qualität und Zuverlässigkeit, Vol. 59, Nr. 5, S. 70-72. (2014)
  
• Aktive Schwingungsdämpfung eines Weißlichtinterferometers.
  Patrick Schäfer, Daniel Broschart and Jörg Seewig
  Technisches Messen, Vol. 80, Nr. 1, S. 16-20. (2013)
  DOI: 10.1524/teme.2013.0003
  https://www.degruyter.com/document/doi/10.1524/teme.2013.0003/html
  
• Application of Ordinary Kriging for Interpolation of Micro-Structured Technical Surfaces.
  Indek Raid, Tatjana Kusnezowa and Jörg Seewig
  Measurement Science and Technology, Vol. 24, Nr. 9, S. 095201-095201. (2013)
  DOI: 10.1088/0957-0233/24/9/095201
  https://iopscience.iop.org/article/10.1088/0957-0233/24/9/095201
  
• Areal Filtering Methods.
  Jörg Seewig and Richard Leach
  Characterisation of Areal Surface Texture, (2013)
  DOI: 10.1007/978-3-642-36458-7_4
  https://link.springer.com/chapter/10.1007/978-3-642-36458-7_4
  
• Filtration of Surface Measurement Data.
  Jörg Seewig, Q. Jane Wang and Yip-Wah Chung
  Encyclopedia of Tribology, (2013)
  DOI: 10.1007/978-0-387-92897-5_301
  
• Influence of Kinematics and Abrasive Configuration on the Grinding Process of Glass.
  Fábio José Pinheiro Sousa, D. S. Hosse, Ingo G. Reichenbach, Jan C. Aurich and Jörg Seewig
  Journal of Materials Processing Technology, Vol. 213, Nr. 5, S. 728-739. (2013)
  DOI: 10.1016/j.jmatprotec.2012.11.026
  https://www.sciencedirect.com/science/article/pii/S0924013612003512?via%3Dihub
  
• Novel Parameters to Assess Feature Size on Functional Surfaces.
  Juri Geringer, Philipp Arnecke and Jörg Seewig
  Surface Topography: Metrology and Properties, Vol. 1, Nr. 1, (2013)
  DOI: 10.1088/2051-672X/1/1/015004
  https://iopscience.iop.org/article/10.1088/2051-672X/1/1/015004
  
• Periodic Gaussian Filter According to ISO 16610-21 for Closed Profiles.
  Jörg Seewig and Matthias Eifler
  Precision Engineering, Vol. 38, Nr. 2, S. 439-442. (2013)
  DOI: 10.1016/j.precisioneng.2013.09.004
  https://www.sciencedirect.com/science/article/pii/S0141635913001499?via%3Dihub
  
• Pneumatische Abstandsmessung – Mathematische Beschreibung von Dynamik Und Übertragungsverhalten.
  Patrick Schäfer, Matthias Eifler and Jörg Seewig
  wt Werkstattstechnik online, Vol. 103, Nr. 11-12, S. 904-910. (2013)
  DOI: 10.37544/1436-4980-2013-11-12-904
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2013-11-12/wt-werkstattstechnik-online-jahrgang-103-2013-heft-11-12?page=1
  
• Qualitätsschutz von Investitionsgütern Verfahren zur Unikatsidentifizierung anhand inhärenter Bauteilmerkmale.
  Marc Wendel, Christian Bohr, Jörg Seewig and Jan C. Aurich
  wt Werkstattstechnik online, Vol. 103, Nr. 7/8, S. 600-604. (2013)
  DOI: 10.37544/1436-4980-2013-7-8-600
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2013-7-8-600/qualitaetsschutz-von-investitionsguetern-jahrgang-103-2013-heft-7-8?page=1
  
• Robust Evaluation of Intensity Curves Measured by Confocal Microscopies.
  Jörg Seewig, Indek Raid, Christian Wiehr, Bini Alapurath George, Peter H. Lehmann, Wolfgang Osten and Armando Albertazzi
  Optical measurement systems for industrial inspection VIII : 13 - 16 May 2013, Munich, Germany ; [part of SPIE optical metrology], (2013)
  DOI: 10.1117/12.2020551
  
• Topografiebeurteilung von Zylinderlaufbahnen.
  Sebastian Pehnelt, Peter Dollinger, Wolfgang Osten and Jörg Seewig
  MTZ : Motortechnische Zeitschrift, Vol. 74, Nr. 4, S. 320-325. (2013)
  DOI: 10.1007/s35146-013-0077-7
  https://link.springer.com/article/10.1007/s35146-013-0077-7
  
• Anwendung von Filtern nach ISO 16610 an unterbrochenen Oberflächenprofilen.
  Jörg Seewig, Michael Dietzsch and Sophie Gröger
  Tagungsband / XIII. Internationales Oberflächenkolloquium, 1. Treffen "Industry Meets Standardization and Science" - IMSAS : 12. - 14. März 2012 an der Technischen Universität Chemnitz [Internationales Oberflächenkolloquium (13 : 2012 : Chemnitz)], (2012)
  
• Scattered Light Sensor for Chatter Mark Detection in Nanometer Scale.
  Jörg Seewig and Marc Wendel
  International Journal of Nanomanufacturing, Vol. 8, Nr. 5/6, S. 484-484. (2012)
  DOI: 10.1504/IJNM.2012.051106
  https://www.inderscienceonline.com/doi/abs/10.1504/IJNM.2012.051106
  
• 3D-Kenngrößen nach ISO 25178.
  Christian Wiehr, Jörg Seewig, Alexander Wanner and Markus Rettenmayr
  Fortschritte in der Metallographie : Vortragstexte der 45. Metallographie-Tagung, 14.-16. September 2011 in Karlsruhe, (2011)
  DOI: 10.14463/KXP:1698167873
  
• Charakterisierung technischer Bauteiloberflächen - Stand der Oberflächenmesstechnik heute.
  Jörg Seewig, Christian Wiehr and S. Gröger
  Messprinzipien - Messgeräte - Anwendungen / 4. Fachtagung Metrologie in der Mikro- und Nanotechnik 2011, Erlangen, 25. und 26. Oktober 2011. VDI, VDE, Mess- und Automatisierungstechnik, (2011)
  
• Light Scattering Methods.
  Theodore V. Vorburger, Richard Silver, Rainer Brodmann, Boris Brodmann, Jörg Seewig and Richard Leach
  Optical Measurement of Surface Topography, (2011)
  DOI: 10.1007/978-3-642-12012-1_12
  
• Uncertainty of Height Information in Coherence Scanning Interferometry.
  Jörg Seewig, T. Böttner, Daniel Broschart, Peter H. Lehmann, Wolfgang Osten and Kay Gastinger
  Optical measurement systems for industrial inspection VII : 23 - 26 May 2011, Munich, Germany ; [part of SPIE optical metrology], (2011)
  DOI: 10.1117/12.889796
  
• Unsicherheitsbetrachtungen zur Formmessung an optischen Bauelementen auf der Basis von Bayes.
  Jörg Seewig and G. Ehret
  Messunsicherheit praxisgerecht bestimmen : Erfurt, 8. und 9. November 2011 / [Fachtagung "Messunsicherheit Praxisgerecht Bestimmen"]. VDI/VDE, Mess- und Automatisierungstechnik, (2011)
  
• Vergleichende Untersuchung optischer Oberflächenmessgeräte mit einem Chirp-Kalibriernormal.
  Sebastian Pehnelt, Wolfgang Osten and Jörg Seewig
  Technisches Messen, Vol. 78, Nr. 10, S. 457-462. (2011)
  DOI: 10.1524/teme.2011.0146
  https://www.degruyter.com/document/doi/10.1524/teme.2011.0146/html
  
• Von der Linie zur Fläche, winkelauflösende Streulichtmesstechnik.
  Boris Brodmann, Jörg Seewig and M. Wendel
  Messprinzipien - Messgeräte - Anwendungen / 4. Fachtagung Metrologie in der Mikro- und Nanotechnik 2011, Erlangen, 25. und 26. Oktober 2011. VDI, VDE, Mess- und Automatisierungstechnik, (2011)
  
• Winkelauflösende Streulichtmesstechnik zur robusten In-Line Messung der Mikrogeometrie auf Zahnflanken - Winkelauflösende Streulichtmesstechnik zur Form- und Rauheitsmessung.
  Jörg Seewig
  4. Fachtagung Verzahnungsmesstechnik 2011 : Leonberg bei Stuttgart, 21. und 22. September 2011 / VDI-VDE-Mess- und Automatisierungstechnik, (2011)
  
• 2nd Generation Lead Measurement.
  Jörg Seewig and Tobias Hercke
  Fundamental and applied metrology : IMEKO XIX world congress, September 6 - 11, 2009, Lisbon, Portugal ; proceedings, (2009)
  
• Assistance System for Optical Sensors.
  R. Schmitt, F. Koerfer, Jörg Seewig, W. Osten, Albert Weckenmann, Harald Bosse, Bernd Bodermann and Richard M. Silver
  Modeling aspects in optical metrology II : 15 - 16 June 2009, Munich, Germany, (2009)
  DOI: 10.1117/12.827339
  
• Extraction of Shape and Roughness Using Scattering Light.
  Jörg Seewig, G. Beichert, R. Brodmann, H. Bodschwinna, Marc Wendel and Peter H. Lehmann
  Optical measurement systems for industrial inspection VI : 15 - 18 June 2009, Munich, Germany, (2009)
  DOI: 10.1117/12.827478
  
• Gaussian Regression Filters.
  Jörg Seewig, Bala Muralikrishnan and Jay Raja
  Computational Surface and Roundness Metrology, (2009)
  DOI: 10.1007/978-1-84800-297-5_9
  https://link.springer.com/chapter/10.1007/978-1-84800-297-5_9
  
• Multisensor Data Fusion in Dimensional Metrology.
  Albert Weckenmann, Xiangqian Jiang, Klaus-Dieter Sommer, Ulrich Neuschaefer-Rube, Jörg Seewig, Laura Shaw and Tyler Estler
  CIRP Annals, Vol. 58, Nr. 2, S. 701-721. (2009)
  DOI: 10.1016/j.cirp.2009.09.008
  https://www.sciencedirect.com/science/article/pii/S0007850609001759?via%3Dihub
  
• Reconstruction of Shape Using Gradient Measuring Optical Systems.
  Jörg Seewig, Tobias Damm, Janick Frasch, David Kauven, Sebastian Rau, Johannes Schnebele, Wolfgang Osten and Malgorzata Kujawinska
  Fringe 2009 [International Workshop on Advanced Optical Metrology (6 : 2009 : Stuttgart)], (2009)
  DOI: 10.1007/978-3-642-03051-2_65
  
• Comparison of Classic and Robust Gauss Filtering for the Determination of Waviness of Non-Isotropic Surfaces.
  F. J. Huertos, Francis Clarysse, Michel Vermeulen, Jörg Seewig and Michael Dietzsch
  Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008)
  
• Lead Characterisation by an Objective Evaluation Method.
  Jörg Seewig and Tobias Hercke
  Wear, Vol. 266, Nr. 5-6, S. 530-533. (2008)
  DOI: 10.1016/j.wear.2008.04.080
  https://www.sciencedirect.com/science/article/pii/S0043164808003025?via%3Dihub
  
• Optical High Speed Twist Characterisation.
  Jörg Seewig, Hans-Joachim Jordan, T. Hercke, R. Volk and Michael Dietzsch
  Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008)
  
• Self-Assembled Ge/Si Islands as Novel Nano-Roughness Standards for Scanning Force Microscopy.
  T. Dziomba, M. Shaleev, M. Rahlves, Jörg Seewig, R. Krüger-Sehm and Michael Dietzsch
  Proceedings / XII. International Colloquium on Surfaces : January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium [Internationales Oberflächenkolloquium (12 : 2008 : Chemnitz)], (2008)