Artikel in Zeitschriften
Im Jahr
- Matthias Eifler, Raimund Volk, Stefan Feifel, Stella Diederichs, Eberhard Kerscher, Jörg Seewig:
Wear analysis of material measures and stylus probes in repetitive tactile calibration
In: Measurement (2024) 115894.
https://doi.org/10.1016/j.measurement.2024.115894 - P. Seensattayawong, E. Kerscher:
The Evolution of Surfaces on Medium-Carbon Steel for Fatigue Life Estimations
In: Coatings 2024, 14, 1077.
https://doi.org/10.3390/ coatings14081077 - Stella Diederichs, Dayan Nugmanov, Yulia Ivanisenko and Eberhard Kerscher :
Corrosion Activity of Ultrafine-Grained Pure Magnesium and ZK60 MagnesiumAlloy in Phosphate Buffered Saline Solution
In: Materials 2024, 17(11), 2726.
https://doi.org/10.3390/ma17112726
- M. Burmeister, E. Kerscher:
Investigation of the stress reduction and temperature increase due to ultrasonic vibrations with different amplitudes during compression tests of steels with varying specimen sizes.
In: Ultrasonics (2023) 107053.
https://doi.org/10.1016/j.ultras.2023.107053
- L. Morales-Rivas, A. Azadi, E. Kerscher:
Short fatigue crack growth in an artificial-defect-containing nanostructured bainitic steel
In: International Journal of Fatigue 166 (2023), 107219.
https://www.sciencedirect.com/science/article/pii/S0142112322004704
- J. Hartig, B. Kirsch, S. Diederichs, E. Kerscher, Jan C. Aurich:
Entwicklung von PVD-Schutzschichten zur Leistungssteigerung galvanisch gebundener Hochleistungsschleifscheiben
In: Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen 70 (2022): S. 148-165.
- L. Simo Kamga, J. Sippel, M. Oehler, M. Gedan-Smolka, B. Sauer:
Einfluss des Substratmaterials bei der Transferschmierung von Stahl-Bronze-Kontakten mit PA66-PTFE-cb Trockenschmierstoffen
In: Tribologie und Schmierungstechnik 69 (2022), Heft 4, pp. 5-11
https://doi.org/10.24053/TuS-2022-0018
- A. Khayatzadeh, J. Sippel, S. Guth, K. H. Lang, E. Kerscher:
Influence of a Thermo-Mechanical Treatment on the Fatigue Lifetime and Crack Initiation Behavior of Quenched and Tempered Steel
In: Metals 2022,12, 204.
https://doi.org/10.3390/met12020204
- L. Morales-Rivas:
Viewpoints on Technological Aspects of Advanced High-Strength Bainitic Steels
In: Metals 2022,12, 195.
https://doi.org/10.3390/met12020195
- L. Morales-Rivas, A. Azadi, E. Kerscher:
Fatigue behavior of nanostructured bainite: A morphological study of crack path
In: Procedia Structural Integrity 39 (2022), 515-527.
https://doi.org/10.1016/j.prostr.2022.03.125
- S. Kieren-Ehses, L Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich:
The influence of the crystallographic orientation when micro machining commercially pure titanium: a size effect (Best Paper Award 2021des SFB 926)
In: Precision Engineering 2021.
https://doi.org/10.1016/j.precisioneng.2021.04.007
- S. Averbeck, D. Spriestersbach, E. Kerscher:
Mechanism of fine granular area and white etching crack formation in AISI 52100 bearing steel.
In: Theoretical and Applied Fracture Mechanics, 108 (2020) 102664.
https://doi.org/10.1016/j.tafmec.2020.102664
- J.P. Sippel, E. Kerscher:
Properties of the Fine Granular Area and Postulated Models for Its Formation during Very High Cycle Fatigue – A Review
In: Applied Sciences 2020, 10, 8475.
https://doi.org/10.3390/app10238475
- L. Morales-Rivas, F. Ram, D. Spriestersbach, J.P. Sippel, M. D. Graef, E. Kerscher:
Fine granular area linked to very high cycle fatigue in martensitic and bainitic steels: Characterization by means of EBSD-dictionary indexing
In: Scripta Materialia 2020, 194, 113644.
https://doi.org/10.1016/j.scriptamat.2020.113644
- Martin Bohley, Ingo G. Reichenbach, Sonja Kieren-Ehses, Lukas Heberger , Peter A. Arrabiyeh, Rolf Merz, Luisa Böhme, Julian Hering, Benjamin Kirsch, Michael Kopnarski, Eberhard Kerscher, Georg von Freymann, Jan C. Aurich:
Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings.
Journal of Manufacturing and Materials Processing (2018) 2, 22.
https://dx.doi.org/10.3390/jmmp2020022
- Eberhard Kerscher, Tilmann Beck, Volker Schulze, Detlef Löhe:
Otmar Vöhringer on the occasion of his 80th birthday.
International Journal of Materials Research 109 (2018) 5, 477-478.
http://dx.doi.org/10.3139/146.610040 (http://dx.doi.org/10.1080/02670844.2017.1282712)
- L. Morales-Rivas, S. Diederichs, L. Böhme, E. Gordo, A. Hebestreit, E. Kerscher:
Method for the detection of grain boundaries in alpha Ti-based alloys by means of polarized light microscopy and image processing in MATLAB.
Practical Metallography, 55 (2018) 10, 678-692.
- L. Böhme, L. Morales-Rivas, S. Diederichs, E. Kerscher:
Crystal c-axis mapping of hcp metals by conventional reflected Polarized Light Microscopy: Application to untextured and textured cp-Titanium.
Materials Characterization 145 (2018) 573-581.
- D. Grell, Y. Wilkin, P.F. Gostin, A. Gebert, E. Kerscher:
Corrosion fatigue studies on fully amorphous Vitreloy 105 under three-point bending conditions.
Frontiers in Materials 3 (2017) 60, 1-10.
https://dx.doi.org/10.3389/fmats.2016.00060
- Daniel Grell, Jens Gibmeier, Stefan Dietrich, Frank Silze, Luisa Böhme, Volker Schulze, Uta Kühn, Eberhard Kerscher:
Influence of shot peening on the mechanical properties of bulk amorphous Vitreloy 105
Surface Engineering, accepted 09.01.2017
http://dx.doi.org/10.1080/02670844.2017.1282712
- C. Ruffing, Y. Ivanisenko, E. Kerscher:
A comparison of the fatigue and fracture behavior of high strength ultrafine grained medium carbon steel SAE 1045 with high strength bearing steel SAE 52100.
21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, Structural Integrity Procedia 2 (2016) 3240–3247
(http://www.sciencedirect.com/science/journal/24523216/2/supp/C)
- D. Spriestersbach, A. Brodyanski, J. Lösch, M. Kopnarski, E. Kerscher:
Very high cycle fatigue of high-strength steels: Crack initiation by FGA formation investigated at artificial defects.
21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, Structural Integrity Procedia 2 (2016) 1101–1108
(http://www.sciencedirect.com/science/journal/24523216/2/supp/C
- Inga Müller, Rosalia Rementeria, Francisca G. Caballero, Matthias Kuntz, Eberhard Kerscher:
Correlation of Fatigue Limit and Crack Growth Threshold Value to the Nanobainitic Microstructure.
submitted and ACCEPTED (28.09.2016) for publication in Key Engineering Materials
- Inga Mueller, Rosalia Rementeria, Francisca G. Caballero, Matthias Kuntz, Thomas Sourmail, Eberhard Kerscher:
A Constitutive Relationship between Fatigue Limit and Microstructure in Nanostructured Bainitic Steels.
Materials 2016, 9 (10) 831; doi: 10.3390/ma9100831
- S. Averbeck, E. Kerscher:
A study of white etching crack formation by compression-torsion experiments.
Frattura ed Integrità Strutturale 38 (2016) 12-18.
- K. Schmidt, S. Buhl, N. Davoudi, C. Godard, R. Merz, I. Raid, E. Kerscher, M. Kopnarski, C. Müller-Renno, S. Ripperger, J. Seewig, C. Ziegler, S. Antonyuk:
Ti surface modification by cold spraying with TiO2 microparticles.
Surface & Coatings Technology xxx (2016) xxx-xxx akzeptiert
- S. Averbeck, E. Kerscher:
Influence of multiaxial fatigue loading conditions on White Etching Crack formation.
Engineering Fracture Mechanics, eingereicht am 22.09.2016, minor revision 18.11.16 eingereicht, akzeptiert am 14.12.16
- Kevin Daubach, Anuschka Gummel, Lukas Kohns, Eberhard Kerscher:
Failure Analysis on a Fractured Rim Star of a Formula Student Racing Car.
Practical Metallography 53 (2016) 2, 98-111, doi: 10.3139/147.110369
- D. Spriestersbach, A. Brodyanski, J. Lösch, M. Kopnarski, E. Kerscher:
Very high cycle fatigue of bearing steels with artificial defects in vacuum.
Materials Science and Technology32 (2016) 11, 1111-1118.
http://dx.doi.org/10.1080/02670836.2015.1119931
- Azmir Azhari, Christian Schindler, Claudia Godard, Jens Gibmeier, Eberhard Kerscher:
Effect of multiple passes treatment in waterjet peening on fatigue performance.
Applied Surface Science 388 A (2016) 468–474.
Proceedings of the 1st International Conference on Applied Surface Science July 27-30, 2016, Shanghai, China.
- E. Dabrock, L. Hagymási, T. Krug, F. Sarfert, E. Kerscher:
Dry austempering heat treatment process: interactions between process parameters, transformation kinetics, and mechanical properties.
Metallurgia Italiana 10 (2015) 49-56 2015.
- S. Buhl, K. Schmidt, D. Sappok, R. Merz, C. Godard, E. Kerscher, M. Kopnarski, B. Sauer, S. Antonyuk, S. Ripperger
Surface structuring of case hardened chain pins by cold-sprayed micro particles to modify friction and wear properties.
Particuology 21 (2015) 32-40.
DOI: 10.1016/j.partic.2014.10.001
- P. F. Gostin, D. Eigel, D. Grell, J. Eckert, E. Kerscher, A. Gebert:
Comparing the pitting corrosion behavior of prominent Zr-based bulk metallic glasses.
Journal of Materials Research 30 (2015) 2, 233-241.
doi: 10.1557/jmr.2014.371
- M. Merzkirch, T. Hammers, A. Reeb, T. Schwind, S. Riedl, L. Thiel, A. Henschel, E. Kerscher, V. Schulze, K.A. Weidenmann:
Fatigue Behavior and Lifetime Prediction of Unidirectionally Wire Reinforced Lightweight Metal Matrix Composites.
Adv. Eng. Mater (2015) doi: 10.1002/adem.201400354
- R. Rementeria, L. Morales-Rivas, M. Kuntz, C. Garcia-Mateo, E. Kerscher, Th. Sourmail, F. G. Caballero:
On the role of microstructure in governing the fatigue behaviour of nanostructured bainitic steels.
Materials Science and Engineering A 630 (2015) 71-77
doi:10.1016/j.msea.2015.02.016
- C. Godard, M. Bohley, J.C. Aurich, E. Kerscher:
Deformation behaviour of micro-milled cp-titanium specimens under tensile loading.
International Journal of Materials Research 106 (2015) 6, 572-579
doi: 10.3139/146.111233
- P. Flaviu Gostin, D. Eigel, D. Grell, M. Uhlemann, E. Kerscher, J. Eckert, A. Gebert:
Stress corrosion cracking of a Zr-based bulk metallic glass.
Materials Science and Engineering A 639 (2015) 681-690
- C. Ruffing, A. Kobler, E. Courtois-Manara, R. Prang, C. Kübel, Y. Ivanisenko, E. Kerscher:
Fatigue Behavior of Ultrafine-Grained Medium Carbon Steel with Different Carbide Morphologies Processed by High Pressure Torsion.
Metals 5 (2015) 891-909
doi:10.3390/met5020891, http://www.mdpi.com/2075-4701/5/2/891
- C. Godard, A. Klingler, T. Junker, E. Kerscher:
The Applicability of Nanoindentation for the Examination of Microstructured Areas in CP Titanium Samples.
Practical Metallography 52 (2015)6, 314-322.
doi 10.3139/147.110342
- P. F. Gostin, D. Eigel, D. Grell, M. Uhlemann, E. Kerscher, J. Eckert, A. Gebert:
Stress-Corrosion Interactions in Zr-Based Bulk Metallic Glasses.
Metals 5 (2015) 1262-1278
doi: 10.3390/met5031262, http://www.mdpi.com/2075-4701/5/3/1262/
- D. Grell, P. F. Gostin, J. Eckert, A. Gebert, E. Kerscher:
In Situ Electrochemical Analysis during Deformation of a Zr-Based Bulk Metallic Glass: A Sensitive Tool Revealing Early Shear Banding.
Advanced Engineering Materials 17 (2015) 11, 1532-1535.
doi: 10.1002/adem.201500273.
- C. Ruffing, E. Kerscher:
Fatigue behavior of ultrafine grained medium carbon steel with different carbide morphologies processed by high pressure torsion.
Advanced Materials Research, 891-892 (2014), 428-433.
doi:10.4028/www.scientific.net/AMR.891-892.428
- P. Grad, D. Spriestersbach, E. Kerscher:
Influence of the inclusion type on the threshold value of failure in the VHCF-regime of high-strength steels.
Advanced Materials Research, 891-892 (2014), 339-344
doi:10.4028/www.scientific.net/AMR.891-892.339
- C. Godard, E. Kerscher:
Characterization of the Fracture Morphology of Commercially Pure (cp)- Titanium Micro Specimens Tested by Tension-Compression Fatigue Tests.
Procedia Materials Science 3 (2014 ) 440-446.
doi: 10.1016/j.mspro.2014.06.074
- A. Azhari, C. Schindler, J. Nkoumbou, E. Kerscher:
Surface Erosion of Carbon Steel 1045 During Waterjet Peening.
Journal of Materials Engineering and Performance. 23 (2014) 5, 1870-1880.
doi: 10.1007/s11665-014-0932-9
- D. Spriestersbach, P. Grad, E. Kerscher:
Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime.
International Journal of Fatigue 64 (2014) 114–120.
- D. Spriestersbach, P. Grad, E. Kerscher:
Crack Initiation Mechanisms and Threshold Values of Very High Cycle Fatigue Failure of High Strength Steels.
Procedia Engineering 74 (2014) 84-91.
doi: 10.1016/j.proeng.2014.06.229
- E. Kerscher:
Influence of microstructure and micro notches on the fatigue limit.
Procedia Engineering 74 (2014) 210-217.
doi: 10.1016/j.proeng.2014.06.251
- A. Azhari, C. Schindler, K. Hilbert, C. Godard, E. Kerscher
Influence of waterjet peening and smoothing on the material surface and properties of stainless steel 304.
Surface and Coatings Technology 258 (2014) 1176–1182.
doi: 10.1016/j.surfcoat.2014.07.013
- P. Gargarella, S. Pauly, K.K. Song, J. Hu, N.S. Barekar, M. Samadi Khoshkhoo, A. Teresiak, H. Wendrock, U. Kühn, C. Ruffing, E. Kerscher, J. Eckert:
Ti-Cu-Ni shape memory bulk metallic glass composites.
Acta Materialia, 61 (2013) 1, 151-162.
- C. Kühn, E. Kerscher:
Consequences of Micro-Milled and Laser Structured Surfaces of CP-Titanium on Tension-Compression Fatigue Behaviour.
Materials Science Forum, 765 (2013), 653-657.
doi:10.4028/www.scientific.net/MSF.765.653
- C. Ruffing, P. Grad, M. Klassen, R. Müller, E. Kerscher:
Experimental and numerical investigation of the microstructural influence on the deformation behavior of notched cp-titanium specimens.
International Journal of Materials Research, 104 (2013) 6, 535-541.
www.ijmr.de/MK110902, DOI: 10.3139/146.110902
- Azhari, C. Schindler, E. Kerscher, P. Grad:
Improving surface hardness of austenitic stainless steel using waterjet peening process.
The International Journal of Advanced Manufacturing Technology, (2012) 63:1035-1046
dx.doi.org/10.1007/s00170-012-3962-1, Doi: 10.1007/s00170-012-3962-1
- P. Grad, B. Reuscher, A. Brodyanski, M. Kopnarski, E. Kerscher:
Analysis of the Crack Initiation at Non-Metallic Inclusions in High-Strength Steels.
Practical Metallography, 49 (2012) 8, 468-469
- P. Grad, B. Reuscher, A. Brodyanski, M. Kopnarski, E. Kerscher:
Mechanism of the fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels.
Scripta Materialia, 67 (2012) 838–41, http://dx.doi.org/10.1016/j.scriptamat.2012.07.049
- V. Wagner, P. Starke, E. Kerscher, D. Eifler:
Cyclic deformation behaviour of railway wheel steels in the very high cycle fatigue (VHCF) regime.
International Journal of Fatigue, 33 (2011) 69-74
- T. Kieczka, E. Kerscher:
Investigation of the fatigue behavior of AlMg4.5Mn (EN AW-5083) in the temperature range -60 °C < T < 20 °C.
Materials Science Forum, 690 (2011) 290-293
doi:10.4028/www.scientific.net/MSF.690.290.
- E. Kerscher, K.-H. Lang, D. Löhe:
Boundaries for increasing the fatigue limit of the bearing steel SAE 52100 by thermomechanical treatments.
Procedia Engineering, 10 (2011) 1985-1990
- H. Germann, P. Starke, E. Kerscher, D. Eifler:
Fatigue behaviour and lifetime calculation of the cast irons EN-GJL-250, EN-GJS-600 and EN-GJV-400.
Procedia Engineering 2 (2010) 1087–1094
- E. Kerscher, K.-H. Lang:
Influence of thermal and thermomechanical treatments on the fatigue limit of a bainitic high-strength bearing steel.
Procedia Engineering, 2 (2010) 1731–1739
- Kay A. Weidenmann, Eberhard Kerscher, Thilo Hammers:
Mechanical Properties of Compound Extruded Aircraft Stringer Profiles Under Cyclic Loading
Advanced Engineering Materials, 12 (2010) 7, 584-586
- K. A. Weidenmann, E. Kerscher, M. Merzkirch:
In Situ Damage Detection With Acoustic Emission Analysis During Cyclic Loading of Wire Reinforced EN AW-6082.
Advanced Engineering Materials, 12 (2010) 7, 637-640
- E. Kerscher, K.-H. Lang:
Increasing the Fatigue Limit of a High-Strength Bearing Steel by a Deep Cryogenic Treatment.
Journal of Physics: Conference Series (JPCS) 240 (2010) 012059
http://dx.doi.org/10.1088/1742-6596/240/1/012059
- T. Schwind, S. Fünfschilling, E. Kerscher, R. Oberacker, M.J. Hoffmann, T. Fett:
Failure of alumina in torsion tests.
Advanced Engineering Materials, 12 (2010) 9, 942-947
DOI: 10.1002/adem.201000126
- T. Schwind, E. Kerscher, K.-H. Lang:
Fatigue of Alumina Under Cyclic Torsion Loading.
Advanced Engineering Materials, 11 (2009) 7, 586-589
DOI: 10.1002/adem.200800430
- Carsten J. Peters, Eberhard Kerscher:
Charakterisierung des Ermüdungsverhaltens hochbeanspruchter Eisenbahnvollräder für den Hochgeschwindigkeitspersonenverkehr bei betriebsrelevanten Temperaturen.
Materialwissenschaft und Werkstofftechnik, 40 (2009) 10, 750 – 755
DOI: 10.1002/mawe.200900525
- E. Kerscher, K.-H. Lang, D. Löhe:
Increasing the Fatigue Limit of a High-Strength Bearing Steel by Thermomechanical Treatment.
Materials Science and Engineering A, 483-484C (2008) 415-417 http://dx.doi.org/10.1016/j.msea.2006.09.170
- E. Kerscher, K.-H. Lang, O. Vöhringer, D. Löhe:
Increasing the fatigue limit of a bearing steel by dynamic strain ageing.
International Journal of Fatigue, 30 (2008) 1838-1842
dx.doi.org/10.1016/j.ijfatigue.2008.02.003, 2008
- K. Weidenmann, E. Kerscher, D. Löhe:
Gefüge und Eigenschaften verbundextrudierter Aluminiumlegierungen.
MP Materials Testing, 50 (2008) 3, 133-141
- K. Weidenmann, A. Klaska, E. Kerscher, D. Löhe:
Gefüge hybrider Verbundstrangpressprofile auf Aluminiumbasis.
Praktische Metallographie, 11 (2008) 533-545
- J. Rögner, B. Okolo, S. Kurzenhäuser, M. Müller, W. Bauer, H.-J. Ritzhaupt-Kleissl, E. Kerscher, V. Schulze:
Relationships between Process, Microstructure and Properties of Molded Zirconia Micro Specimens.
Microsystems Technologies, 14 (2008), 1831 – 1837
DOI: 10.1007/s00542-008-0631-2.
- M. Merzkirch, K. A. Weidenmann, E. Kerscher, D. Löhe:
Documentation of the Corrosion of Composite-Extruded Aluminium Matrix Extrusions Using the Push-Out Test.
Advanced Materials Research, 43 (2008) 17-22
- T. Kloppenborg, T. Hammers, M. Schikorra, E. Kerscher, A. E. Tekkaya, D. Löhe:
Prototype Manufacturing of Extruded Aluminum Aircraft Stringer Profiles with Continuous Reinforcement
Advanced Materials Research, 43 (2008) 167-174
- J. Rögner, E. Kerscher, V. Schulze, D. Löhe:
Mechanical Properties of Primary Shaped Notched Micro Specimens Made of Aluminum Bronze.
Advanced Engineering Materials, 10 (2008) 6, 529-533
DOI: 10.1002/adem.200800032.
- G. Baumeister, B. Okolo, J. Rögner, R. Ruprecht, E. Kerscher, V. Schulze, J. Haußelt, D. Löhe:
New results on microcasting of Al bronze.
Microsystem Technologies, 14 (2008) 1813-1821
DOI: 10.1007/s00542-008-0671-7
- T. Schwind, T. Schalk, E. Kerscher, T. Beck, K.-H. Lang, D. Löhe:
Thermal, mechanical and fretting fatigue of silicon nitride.
International Journal of Materials Research, 99 (2008) 10, 1090 – 1096
- K.A. Weidenmann, A. M. Klaska, E. Kerscher, D. Löhe:
Gefüge hybrider Verbundstrangpressprofile auf Aluminiumbasis / Microstructure of Hybrid Composite Extrusions with Aluminum-Based Matrices.
Praktische Metallographie, 45 (2008) 11, 533-545
- A. Klaska, A. Ohl, E. Kerscher, T. Beck, D. Löhe:
Gefügedarstellung der stranggepressten Aluminiumknetlegierung EN AW-6061 und der MMC-Werkstoffe EN AW-6061 verstärkt mit 15 und 22 vol.-% Al2O3-Partikeln.
Praktische Metallographie, 44 (2007) 1, 33-51
- K. A. Weidenmann, Th. Schwind, E. Kerscher, D. Löhe:
Zyklische Beanspruchung drahtverstärkter Verbundstrangpressprofile mit Aluminiummatrix.
Mat.wiss. u. Werkstofftechnik, 38 (2007) 2, 75-78
- K. A. Weidenmann, E. Kerscher, V. Schulze, D. Löhe:
Characterization of the interfacial properties of compound-extruded lightweight profiles using the push-out-technique.
Materials Science and Engineering, A424 (2006), 205-211
- K. A. Weidenmann, E. Kerscher, V. Schulze, D. Löhe:
Mechanical properties of compound-extruded aluminium-matrix profiles under quasi-static loading conditions.
Advanced Materials Research: Flexible Manufacture of Lightweight Frame Structures, 10 (2006), 23-33
- R. Ermel, T. Beck, and E. Kerscher:
Analysis of failure behaviour of carbon/carbon composite made by chemical vapour infiltration considering fibre, matrix and interface properties.
International Journal of Materials Research, 97 (2006) 10, 1401-1409
- K. A. Weidenmann, M. Schomäcker, E. Kerscher, D. Löhe, M. Kleiner:
Composite extrusion of aluminium matrix specimens reinforced with continuous ceramic fibres.
Light Metal Age, 63 (2005) 5, 6-10
- E. Kerscher, M. T. Kelemen, K.H. Diefenbach, O. Stockert, H.v. Löhneysen, E. Dormann:
Single-crystal like NMR spectra of CeCu5Au powder samples.
European Physical Journal B - Condensed Matter, 19 (2001) 2, 241-248
Kontakt
Arbeitsgruppe Werkstoffprüfung
Postanschrift intern: Gebäude 44, FB MV
Besucher: Gebäude 49, Raum 316
Labor: Gebäude 44, Raum 207
Gottlieb-Daimler-Straße
D-67663 Kaiserslautern
Telefon: +49 (0)631 205 3571
E-Mail: mv-awp@lists.rptu.de