Sortiere nach: Autor, Jahr, Titel
Literaturliste
- Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling.
Proceedings in Applied Mathematics and Mechanics, Vol. 19, Nr. 1, S. 201900017. (2019) - Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505.
Metals, Vol. 9, Nr. 4, S. 480 - 28. (2019) - Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling.
Concrete Innovations in Materials, Design and Structures, 16th fib Symposium Proceedings, (2019) - Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue.
Advances in Engineering Materials, Structures and Systems, (2019) - Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete.
Advances in Engineering Materials, Structures and Systems, (2019) - Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models.
Structural Concrete, Vol. 20, Nr. 4, S. 1254 - 1264. (2019) - Martensitic transformation in a two-dimensional polycrystalline shape memory alloys using a multi-phase-field elasticity model based on pairwise rank-one convexified energies at small strain.
Proceedings in Applied Mathematics and Mechanics, Vol. 20, Nr. 1, S. 202000200. (2021) - On a tangential-conforming finite element formulation for the relaxed micromorphic model in 2D.
Proceedings in Applied Mathematics and Mechanics, Vol. 21, Nr. 1, S. 202100187. (2021) - Lagrange and $H(\text curl,\mathcal B)$ based finite element formulations for the relaxed micromorphic model.
Computational Mechanics, Vol. 70, S. 1309 - 1333. (2022) - Modeling the size-effect of metamaterial beams under bending via the relaxed micromorphic continuum.
Proceedings in Applied Mathematics and Mechanics, Vol. 22, Nr. 1, S. 202200033. (2023) - On the identification of material parameters in the relaxed micromorphic continuum.
Proceedings in Applied Mathematics and Mechanics, Vol. 23, Nr. 3, S. 202300056. (2023) - Size-effects of metamaterial beams subjected to pure bending. on boundary conditions and parameter identification in the relaxed micromorphic model.
Computational Mechanics, Vol. 72, Nr. 5, S. 1091 - 1113. (2023) - Dirichlet and Neumann boundary conditions in a lattice Boltzmann method for elastodynamics.
Computational Mechanics, S. 1 - 23. (2023) - Modelling transient stresses in dynamically loaded elastic solids using the Lattice Boltzmann Method.
PAMM, Vol. 23, Nr. 1, S. 202200163. (2023) - Configurational forces in a phase field model for the cyclic fatigue of heterogeneous materials.
Forces in Mechanics, S. 100239. (2023) - On dynamic crack propagation in a lattice Boltzmann method for elastodynamics in 2D.
PAMM, S. 202300230. (2023) - FoldMatch. accurate and high fidelity garment fitting onto 3d scans.
2020 IEEE International Conference on Image Processing (ICIP), S. 2716 - 2720. (2020) - Effiziente integrationsmethoden für isogeometrische schalenelemente.
, (2020) - Lattice Boltzmann Simulation of Plane Strain Problems.
PAMM, Vol. 20, Nr. 1, S. 202000119. (2021) - An efficient implementation of a phase field model for fatigue crack growth.
International Journal of Fracture, Vol. 237, Nr. 1-2, S. 47 - 60. (2022) - AN EFFICIENT PHASE FIELD MODEL FOR FATIGUE FRACTURE.
Volume 100 Fracture, Damage and Failure Mechanics, WCCM-APCOM, 2022, (2022) - Configurational Forces in a Phase Field Model for Fatigue.
PAMM, Vol. 22, Nr. 1, S. 202200034. (2023) - Phase Field Simulations for Fatigue Failure Prediction in Manufacturing Processes.
International Research Training Group Conference on Physical Modeling for Virtual Manufacturing Systems and Processes, S. 16 - 31. (2023) - Simulation of vibrating droplets using a phase field approach.
PAMM, Vol. 23, Nr. 2, (2023-sep)
DOI: 10.1002/pamm.202300232 - Wetting of rough surfaces in a phase field model.
PAMM, Vol. 22, Nr. 1, (2023-mar)
DOI: 10.1002/pamm.202200275 - Adsorption in a phase field model for wetting.
PAMM, Vol. 21, Nr. 1, (2021-dec)
DOI: 10.1002/pamm.202100145 - Phase Field Modeling of Dynamic Surface Wetting informed by Molecular Simulations.
PAMM, Vol. 21, Nr. 1, (2021-dec)
DOI: 10.1002/pamm.202100051 - Numerical methods for the modeling of the magnetization vector in multiferroic heterostructures.
PAMM, Vol. 17, Nr. 1, S. 503 - 504. (2017-dec)
DOI: 10.1002/pamm.201710221 - Size-effects of metamaterial beams subjected to pure bending. on boundary conditions and parameter identification in the relaxed micromorphic model.
Computational Mechanics, Vol. 72, S. 1091 - 1113. (2023)
DOI: 10.1007/s00466-023-02332-9 - On the numerical homogenization of real polycrystalline microstructures.
Proceedings in Applied Mathematics and Mechanics, Vol. 22, Nr. 1, S. 202200251. (2023) - A numerical study of the effect of phase evolution on residual stresses during cooling.
PAMM, Vol. 20, Nr. 1, S. 202000236. (2021)
DOI: https://doi.org/10.1002/pamm.202000236
https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.202000236 - Reduced order models for material non-linearities in FEM applications.
PAMM, Vol. 21, Nr. 1, S. 202100021. (2021)
DOI: https://doi.org/10.1002/pamm.202100021
https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.202100021 - Modeling the size-effect of metamaterial beams under bending via the relaxed micromorphic continuum.
Proceedings in Applied Mathematics and Mechanics, Vol. 22, Nr. 1, S. 202200033. (2023) - Numerical investigation of hot bulk forming processes with respect to the resulting residual stress distribution.
Proceedings in Applied Mathematics and Mechanics, Vol. 22, Nr. 1, S. 202200155. (2023) - On a tangential-conforming finite element formulation for the relaxed micromorphic model in 2D.
Proceedings in Applied Mathematics and Mechanics, Vol. 21, Nr. 1, S. 202100187. (2021)
DOI: https://doi.org/10.1002/pamm.202100187
https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.202100187 - Lagrange and H(curl,B) based finite element formulations for the relaxed micromorphic model.
Computational Mechanics, Vol. 70, S. 1309 - 1333. (2022)
DOI: https://doi.org/10.1007/s00466-022-02198-3 - Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations.
Computational Mechanics, Vol. 54, S. 1269 - 1284. (2014) - Construction of 3D statistically similar RVEs for dual-phase steel microstructures.
XII International Conference on Computational Plasticity. Fundamentals and Applications, (2013-September 3–5) - Simulation of dual phase steels based on three-dimensionalsional statistically similar RVEs.
Proceedings of the 19th International Symposium on Plasticity and its Current Applications, (2013-January 3–8) - Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505.
Metals, Vol. 9, Nr. 4, S. 480 - 28. (2019) - Computational Modeling of Dual-Phase Steels Based on Representative Three-Dimensional Microstructures Obtained from EBSD Data.
Archive of Applied Mechanics, Vol. 86, Nr. 3, S. 575 - 598. (2016) - On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling.
Proceedings in Applied Mathematics and Mechanics, Vol. 18, Nr. 1, S. 201800256. (2018) - A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading.
Proceedings in Applied Mathematics and Mechanics, Vol. 18, Nr. 1, S. 201800321. (2018) - Scale-briding of elasto-plastic microstructures using statistically similar representative volume elements.
(2017) - Construction of Statistically Similar RVEs.
Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78), (2015) - Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals.
Mechanics of Materials, Vol. 90, S. 185 - 201. (2015) - Study on statistically similar RVEs for real microstructures based on different statistical descriptors.
Proceedings in Applied Mathematics and Mechanics, Vol. 15, Nr. 1, S. 467 - 468. (2015)
DOI: 10.1002/pamm.201510224 - Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs.
Proceedings in Applied Mathematics and Mechanics, Vol. 14, S. 539 - 540. (2014) - Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures.
Proceedings in Applied Mathematics and Mechanics, Vol. 13, Nr. 1, S. 271 - 272. (2013) - A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures.
Proceedings of PLASTICITY’15, (2015-January 4–9) - Construction of Statistically Similar RVEs for 3D Microstructures.
Proceedings in Applied Mathematics and Mechanics, Vol. 12, Nr. 1, S. 429 - 430. (2012) - Statistically similar RVE construction based on 3D dual-phase steel microstructures.
Research and Applications in Structural Engineering, Mechanics & Computation, S. 411 - 416. (2013) - Comparative Study for the Efficient Construction of Statistically Similar RVEs. Lineal-Path and Minkowski Functionals.
Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI), (2014) - A novel algorithm for rate independent small strain crystal plasticity based on the infeasible primal-dual interior point method.
International Journal of Plasticity, Vol. 124, S. 1 - 19. (2020) - Numerical treatment of small strain single crystal plasticity based on the infeasible primal-dual interior point method.
International Journal of Solids and Structures, Vol. 232, S. 111149. (2021)
DOI: 10.1016/j.ijsolstr.2021.111149 - Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure.
Insights and Innovations in Structural Engineering, Mechanics & Computation, S. 433 - 438. (2016) - On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming.
Proccedings of the “Forming Technology Forum 2012”, (2012-Juni 5-6,) - Hochleistungsrechnen trifft Hochleistungsstahl.
Essener Unikate 50, (2017) - Small strain crystal plasticity based on the primalâdual interior point method.
Proceedings in Applied Mathematics and Mechanics, Vol. 19, Nr. 1, S. 201900499. (2019)
DOI: 10.1002/pamm.201900499 - Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling.
Proceedings in Applied Mathematics and Mechanics, Vol. 19, Nr. 1, S. 201900017. (2019)
DOI: 10.1002/pamm.201900017 - Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts.
Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, S. 235 - 238. (2019-August, 28-30) - Model order reduction for small strain elastoplasticity based on an adaptive strategy.
Proceedings in Applied Mathematics and Mechanics, Vol. 20, Nr. 1, S. 202000182. (2021)
DOI: 10.1002/pamm.202000182 - EXASTEEL. Towards a Virtual Laboratory for the Multiscale Simulation of Dual-Phase Steel Using High-Performance Computing.
Software for Exascale Computing - SPPEXA 2016-2019, S. 351 - 404. (2020) - Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala.
Forschung im Ingenieurwesen, Vol. 85, S. 757 - 771. (2021)
DOI: 10.1007/s10010-021-00482-x - Residual stresses in hot bulk formed parts. microscopic stress analysis for austenite-to-martensite phase transformation.
Archive of Applied Mechanics, Vol. 91, S. 3603 - 3625. (2021)
DOI: 10.1007/s00419-021-01921-5 - Residual stresses in hot bulk formed parts. two-scale approach for austenite-to-martensite phase transformation.
Archive of Applied Mechanics, Vol. 91, S. 545 - 562. (2021) - A comparative study of numerical approaches for the computation of effective properties of micro-heterogeneous materials.
Proceedings in Applied Mathematics and Mechanics, Vol. 20, Nr. 1, S. 202000249. (2021)
DOI: https://doi.org/10.1002/pamm.202000249 - Remarks on a primal-dual interior point algorithm for single crystal plasticity.
Proceedings in Applied Mathematics and Mechanics, Vol. 21, Nr. 1, S. 202100212. (2021) - Adaptive methods for MOR in non-linear FE simulations of unit cells.
Proceedings of Applied Mechanics and Mathematics, Vol. 22, Nr. 1, S. 202200065. (2023) - On the numerical treatment of heat sources in laser beam welding processes.
Proceedings in Applied Mechanics and Mathematics, Vol. 22, Nr. 1, S. 202200220. (2023)
DOI: 10.1002/pamm.202200220 - A Physically Motivated Heat Source Model for LaserBeam Welding.
Metals, Vol. 14, Nr. 430, (2024)
DOI: 10.3390/met14040430 - On the realization of periodic boundary conditions for periodic unitcells.
Finite Elements in Analysis and Design, Vol. 229, Nr. 1, S. 104067. (2023)
DOI: https://doi.org/10.1016/j.finel.2023.104067 - A computational approach to identify the material parameters of the relaxed micromorphic model.
Computer Methods in Applied Mechanics and Engineering, Vol. 425, S. 116944. (2024) - Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors.
Procedia Engineering, Vol. 81, S. 1360 - 1365. (2014) - Comparison of barrier update strategies for interior point algorithms in single crystal plasticity.
Archive of Applied Mechanics (submitted), (2024) - Construction of Statistically Similar RVEs for 3D Microstructures.
(2012) - Primitive Agentic First-Order Optimization.
arXiv preprint arXiv:2406.04841, (2024) - Unifying relations between iterative linear equation solvers and explicit Euler approximations for associated parabolic regularized equations.
Results in Applied Mathematics, Vol. 13, S. 100227. (2022) - Computational rational engineering and development. Synergies and opportunities.
Intelligent Systems and Applications, S. 744 - 763. (2022) - Benchmarking for metaheuristic black-box optimization. perspectives and open challenges.
2020 IEEE Congress on Evolutionary Computation (CEC), S. 1 - 8. (2020) - Toward lightweight smart automotive hood structures for head impact mitigation. Integration of active stiffness control composites.
Journal of Intelligent Material Systems and Structures, Vol. 31, Nr. 1, S. 71 - 83. (2020) - Topology optimization combined with element-by-element solution techniques.
PAMM, Vol. 19, Nr. 1, S. 201900173. (2019) - Simulation of crash events for an electric four wheel vehicle.
Procedia Structural Integrity, Vol. 12, S. 249 - 264. (2018) - An efficient mass lumping scheme for isogeometric analysis based on approximate dual basis functions.
Tech. Mech., Vol. 44, Nr. 1, S. 14 - 46. (2024)
DOI: 10.24352/UB.OVGU-2024-052 - A spectral finite element Reissner-Mindlin shell formulation with NURBS-based geometry definition.
Comp. Mech., (2024)
DOI: 10.1007/s00466-024-02444-w - An isogeometric mortar method for the coupling of multiple NURBS domains with optimal convergence rates.
Numer. Math., Vol. 149, Nr. 4, S. 871 - 931. (2021) - Phase field model for the martensitic transformation. comparison of the Voigt/Taylor and Khachaturyan approach.
Continuum Mech. Thermodyn., Vol. 33, S. 2075 - 2094. (2021) - An isogeometric Reissner-Mindlin shell element based on Bézier dual basis functions. overcoming locking and improved coarse mesh accuracy.
Comput. Methods Appl. Mech. Engrg., Vol. 370, S. 113283. (2020) - Patch coupling in isogeometric analysis of solids in boundary representation using a mortar approach.
Int. J. Numer. Meth. Engng., Vol. 121, Nr. 14, S. 3206 - 3226. (2020) - Coupled phase field simulations of ferroelectric and ferromagnetic layers in multiferroic heterostructures.
Arch. Appl. Mech., Vol. 89, Nr. 6, S. 1031 - 1056. (2019) - A phase-field model for transversely isotropic ferroelectrics.
Arch. Appl. Mech., Vol. 89, Nr. 6, S. 1057 - 1068. (2019) - Adjusted approximation spaces for the treatment of transverse shear locking in isogeometric Reissner–Mindlin shell analysis.
Comput. Methods Appl. Mech. Engrg., Vol. 354, S. 850 - 870. (2019) - Isogeometric Bézier dual mortaring. Refineable higher-order spline dual bases and weakly continuous geometry.
Comput. Methods Appl. Mech. Engrg., Vol. 333, S. 497 - 534. (2018) - A phase field model for martensitic transformation coupled with the heat equation.
GAMM-Mitteilungen, Vol. 40, Nr. 2, S. 138 - 153. (2017) - Dual and approximate dual basis functions for B-splines and NURBS – Comparison and application for an efficient coupling of patches with the isogeometric mortar method.
Comput. Methods Appl. Mech. Engrg., Vol. 316, S. 449 - 496. (2017) - On the use of NURBS-based discretizations in the scaled boundary finite element method for wave propagation problems.
Comput. Methods Appl. Mech. Engrg., Vol. 315, S. 867 - 880. (2017) - Implicit dynamic analysis using an isogeometric Reissner–Mindlin shell formulation.
Int. J. Numer. Meth. Engng., Vol. 110, Nr. 9, S. 803 - 825. (2017) - An efficient and robust rotational formulation for isogeometric Reissner–Mindlin shell elements.
Comput. Methods Appl. Mech. Engrg., Vol. 303, S. 1 - 34. (2016) - Hybrid collocation-Galerkin approach for the analysis of surface represented 3D-solids employing SB-FEM.
Comput. Methods Appl. Mech. Engrg., Vol. 295, S. 268 - 289. (2015) - The weak substitution method – An application of the mortar method for patch coupling in NURBS-based isogeometric analysis.
Int. J. Numer. Meth. Engng., Vol. 103, Nr. 3, S. 205 - 234. (2015) - A NURBS based hybrid collocation-Galerkin method for the analysis of boundary represented solids.
Comput. Methods Appl. Mech. Engrg., Vol. 284, S. 689 - 711. (2015) - Treatment of Reissner–Mindlin shells with kinks without the need for drilling rotation stabilization in an isogeometric framework.
Comput. Methods Appl. Mech. Engrg., Vol. 276, S. 35 - 66. (2014) - Isogeometric Reissner–Mindlin shell analysis with exactly calculated director vectors.
Comput. Methods Appl. Mech. Engrg., Vol. 253, S. 491 - 504. (2013) - Interpolation of Rotations and Coupling of Patches in Isogeometric Reissner–Mindlin Shell Analysis.
(2015) - Vergleich zwischen isogeometrischen und spektralen Reissner-Mindlin Schalenelementen.
Berichte der Fachtagung Baustatik – Baupraxis 15, S. 333 - 340. (2024)
DOI: 10.15480/882.9247 - Investigations on adapted interpolation orders for a mixed isogeometric plate formulation.
Proc. Appl. Math. Mech., Vol. 23, Nr. 4, S. 202300170. (2023) - On the use of mixed basis function degrees within a convective isogeometric element formulation.
Proc. Appl. Math. Mech., Vol. 23, Nr. 1, S. 202200159. (2023) - Lumping für explizite Zeitintegration in der isogeometrischen Analyse.
Forschungskolloquium 2021 in 2022, S. 20 - 21. (2022) - Eine konvektive isogeometrische Elementformulierung mit angepassten Interpolationsordnungen.
Forschungskolloquium 2021 in 2022, S. 51 - 52. (2022) - A mixed isogeometric plane stress and plane strain formulation with different continuities for the alleviation of locking.
Proceedings of the YIC 2021 - VI ECCOMAS Young Investigators Conference, S. 109 - 118. (2022) - An isogeometric element formulation for linear two-dimensional elasticity based on the Airy equation.
Proceedings of the YIC 2021 - VI ECCOMAS Young Investigators Conference, S. 129 - 138. (2022) - Foldmatch. Accurate and high fidelity garment fitting onto 3D scans.
Proceedings of 2020 IEEE International Conference on Image Processing (ICIP), S. 2716 - 2720. (2020) - Effiziente Integrationsmethoden für isogeometrische Schalenelemente.
Berichte der Fachtagung Baustatik – Baupraxis 14, S. 415 - 422. (2020) - Modeling of electric field-induced magnetization switching in multiferroic heterostructures.
Proc. Appl. Math. Mech., Vol. 19, S. 201900103. (2019) - Martensitic transformation at a crack under mode I and II loading.
Proc. Appl. Math. Mech., Vol. 19, S. 201900465. (2019) - Phase field modelling of ferroelectric-ferromagnetic interfaces.
Proceedings of 3rd Seminar on the Mechanics of Multifunctional Materials, S. 93 - 96. (2018) - Numerical methods for the modeling of the magnetization vector in multiferroic heterostructures.
Proc. Appl. Math. Mech., Vol. 17, S. 503 - 504. (2017) - Recent advances in isogeometric dual mortar patch coupling.
Proceedings of the 7th GACM Colloquium on Computational Mechanics, S. 467 - 470. (2017) - A method for the elimination of shear locking effects in an isogeometric Reissner-Mindlin shell formulation.
Proceedings of the 7th GACM Colloquium on Computational Mechanics, S. 500 - 503. (2017) - Dual basis functions for isogeometric solid mechanics.
Contributions to the Foundations of Multidisciplinary Research in Mechanics, S. 2899 - 2900. (2016) - Patch coupling with the isogeometric dual mortar approach.
Proc. Appl. Math. Mech., Vol. 16, S. 193 - 194. (2016) - Isogeometric Reissner–Mindlin shell analysis – employing different control meshes for displacements and rotations.
Proc. Appl. Math. Mech., Vol. 16, S. 209 - 210. (2016) - An isogeometric Reissner–Mindlin shell element for dynamic analysis considering geometric and material nonlinearities.
J. Phys., Vol. 734, Nr. 3, S. 032063. (2016) - Advantages and challenges of isogeometric structural analysis of thin-walled structures.
Proceedings of Young Researchers Symposium 2016, S. 43 - 48. (2016) - On the Isogeometric Version of the Scaled Boundary Finite Element Method.
Oberwolfach Rep., Vol. 13, S. 382 - 385. (2016) - The influence of integration schemes in isogeometric Reissner–Mindlin shell analysis.
Conference Proceedings of the YIC GACM 2015, (2015) - A hybrid collocation-Galerkin approach for the analysis of 3D solids.
Conference Proceedings of the YIC GACM 2015, (2015) - An efficient and robust Reissner–Mindlin shell formulation for isogeometric analysis.
Proc. Appl. Math. Mech., Vol. 15, S. 187 - 188. (2015) - A surface oriented solid formulation based on a hybrid Galerkin-collocation method.
Proc. Appl. Math. Mech., Vol. 15, S. 290 - 210. (2015) - A NURBS based collocation approach for SB-FEM.
Proc. 11th World Congress on Computational Mechanics (WCCM XI), S. 2469 - 2480. (2014) - Coupling of non-conforming NURBS patches with the weak substitution method.
Proc. Appl. Math. Mech., Vol. 14, S. 269 - 270. (2014) - A New Method for the Connection of Non-Conforming NURBS Patches in Isogeometric Analysis.
Proc. Appl. Math. Mech., Vol. 13, S. 117 - 118. (2013) - The interpolation of the director vector for isogeometric Reissner–Mindlin shell analysis.
Proc. 6th European Congress on Computational Methods in Applied Sciences and Engineering, S. 4556 - 4565. (2012) - On the choice of the director for isogeometric Reissner–Mindlin shell analysis.
Proceedings of the 10th World Congress on Computational Mechanics, S. 727 - 739. (2012) - Boundary Conditions and Multi-Patch Connections in Isogeometric Analysis.
Proc. Appl. Math. Mech., Vol. 11, S. 207 - 208. (2011)