Martin Bohley, Ingo G. Reichenbach, Sonja Kieren-Ehses, Lukas Heberger , Peter A. Arrabiyeh, Rolf Merz, Luisa Böhme, Julian Hering, Benjamin Kirsch, Michael Kopnarski, Eberhard Kerscher, Georg von Freymann, Jan C. Aurich:
Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings
In: Journal of Manufacturing and Materials Processing (2018) 2, 22.
News
Publications in October 2024:
Stella Diederichs, Lucía Morales-Rivas, Eberhard Kerscher:
Identification of Twinning Systems in Commercially-Pure Titanium using Polarized Light Microscopy
In: Conference Proceedings: Chapter 4: C-M-P – Deformation Behaviour, World Titanium Conference 2023, 12nd-16th 06.2023, Edinburgh, Schottland.
https://doi.org/10.7490/f1000research.1119885.1
Stella Diederichs, Nafiseh Ghavidel, Luisa Böhme, Claudia Godard, Eberhard Kerscher:
Interrelationship of Manufacturing, Surface Morphology, and Mechanical Properties of Commercial Pure Titanium
In: Conference Proceedings: Chapter 14: Forming, Machining & Joining bei World Titanium Conference 2023, 12nd -16th 06.2023, Edinburgh, Schottland.
https://doi.org/10.7490/f1000research.1119929.1
Nafiseh Ghavidel, Eberhard Kerscher:
Influence of Thermomechanical Treatment on the Mechanical Properties of CP-Ti
In: Conference Proceedings: Chapter 20: Thermomechanical Processing, World Titanium Conference 2023, 12nd -16th 06.2023, Edinburgh, Schottland.
https://doi.org/10.7490/f1000research.1119941.1
Matthias Eifler, Raimund Volk, Stefan Feifel, Stella Diederichs, Eberhard Kerscher, Jörg Seewig:
Wear analysis of material measures and stylus probes in repetitive tactile calibration
In: Measurement (2024) 115894.
https://doi.org/10.1016/j.measurement.2024.115894
Materials Science and Engineering Congress (MSE) 2024
Stella Diederichs attended Materials Science and Engineering Congress (MSE) in Darmstadt (Germany) on 24th September 2024with the following presentation:
D. Nugmanov, S. Diederichs (Speaker), E. Kerscher, Y. Ivanisenko:
Tensile and fatigue strength of the ZK60 alloy after High Pressure Torsion Extrusions
In: Materials Science and Engineering Congress (MSE) 2024, 24th September 2024, Darmstadt, Germany.
Materialographie 2024
Nafiseh Ghavidel, Anja Hebestreit and Stella Diederichs attended Materialographie 2024 in Berlin (Germany) on 18th-20th September 2024 with the following posters:
N. Ghavidel, A. Hebestreit, E. Kerscher:
Exploring Twinning Deformation by Polarised Light Microscopy After Cyclic Deformation of cp-Ti at Intermediate Temperatures
In: 58. Materialographie 2024, 18th-20th September 2024, Berlin, Germany.S. Diederichs, A. Hebestreit, E. Kerscher:
Zusammenhang zwischen der Oberflächentopografie polierter cp-Ti Proben und der kristallographischen Orientierung der Körner
In: 58. Materialographie 2024, 18th-20th September 2024, Berlin, Germany.
European Conference on Fracture 2024
Dr. Lucia Morales-Rivas (former member of AWP, now CENIM, Spain) and Eberhard Kerscher joined the European Conference on Fracture 2024, Zagreb, Croatia, 26th-30th August 2024. Both gave talks about work done in AWP:
E. Kerscher (Co-Author: J. Metternich):
The Influence of a Thermomechanical Treatment on the VHCF-Limit of a High-Strength Bearing Steel
In: European Conference on Fracture 2024, 26th-30th August 2024, Zagreb, Croatia.Lucia Morales-Rivas (Co-Author: Eberhard Kerscher):
Fatigue Crack Initiation And Growth in Steels Containing a Metastable Second Phase: Notch And Microstructural Effects
In: European Conference on Fracture 2024, 26th-30th August 2024, Zagreb, Croatia.
Publications in August 2024:
S. Yan, A. Jawaid, E. Kerscher, J. Seewig, R. Müller:
Model-based analysis of the influence of surface roughness on fatigue processes
In: Proceedings in Applied Mathematics and Mechanics (2024) e202400039.
https://doi.org/10.1002/pamm.202400039
P. Seensattayawong, E. Kerscher:
The Evolution of Surfaces on Medium-Carbon Steel for Fatigue Life Estimations
In: Coatings 2024, 14, 1077.
https://doi.org/10.3390/ coatings14081077
Tenth International Conference on Engineering Failure Analysis (ICEFA X) 2024
Phanuphak Seensattayawong attended the Tenth International Conference on Engineering Failure Analysis (ICEFA X) 2024 in Athens (Greece) on 7th-10th July 2024 with the following presentation:
P. Seensattayawong, R. Brodmann, G.Stelzer, J. Seewig, E. Kerscher:
The study of roughness measurements and surface development in the early stage of fatigue failure of high and medium carbon steels using a confocal scanning microscope and a light scattering sensor
In: Tenth International Conference on Engineering Failure Analysis (ICEFA X) 2024, 7th-10th July 2024, Athens, Greece.
Cobalt and Tungsten in tools - Carl Zeiss Foundation funds project with 4.9 million euros
Cobalt and Tungsten play an important role in industry, for example in alloys or battery production. The metals are often mined under questionable working and environmental conditions. They are also important in so-called hard metal tools such as drills, milling and turning tools. A research project at the Rheinland-Pfälzischen Technischen Universität Kaiserslautern-Landau (RPTU) will focus on reducing the proportion of these critical raw materials in the tools, replacing them or recycling the material in a material cycle. The Carl Zeiss Foundation is funding the work for six years with around 4.9 million euros.
Publications in June 2024:
Stella Diederichs, Dayan Nugmanov, Yulia Ivanisenko and Eberhard Kerscher :
Corrosion Activity of Ultrafine-Grained Pure Magnesium and ZK60 MagnesiumAlloy in Phosphate Buffered Saline Solution
In: Materials 2024, 17(11), 2726.
https://doi.org/10.3390/ma17112726
Frühjahrssitzung der DGM/DVM – AG Materialermüdung
Jan Metternich attended the Frühjahrssitzung der DGM/DVM – AG Materialermüdung in Saarbrücken (Germany) on 30 April 2024 with the following presentation:
J. Metternich, E. Kerscher:
Steigerung der Ermüdungsfestigkeit hochfester Stähle durch thermomechanische Behandlung im Temperaturbereich der maximalen dynamischen Reckalterung
At: Frühjahrssitzung der DGM/DVM – AG Materialermüdung, 30 April 2024, Saarbrücken, Germany.
International Conference on the Technology of Plasticity (ICTP) 2023
Markus Burmeister attended the International Conference on the Technology of Plasticity (ICTP) 2023 in Mandelieu-La Napoule (France) on 24th-29th September 2023 with the following presentation:
M. Burmeister, E. Kerscher:
Ultrasonic Vibration Influences on the Flow Stress Behavior of a Ferrite-Perlite and Austenite Stainless Steel
At: International Conference on the Technology of Plasticity (ICTP) 2023, 24th-29th September 2023, Mandelieu-La Napoule, France.
- Visit at Rosswag GmbH in Pfinztal
As part of the annual AWP seminar, we visited Rosswag GmbH and gained insights into open die forging and selective laser melting in industrial manufacturing.
Thanks to the team at Rosswag!
FEMS Euromat 2023
Markus Burmeister and Stella Diederichs attended the FEMS Euromat 2023 in Frankfurt (Germany) on 3rd-7th September 2023 with the following presentations:
M. Burmeister, E. Kerscher:
Influences of Superimposed Ultrasonic Vibration on the Flow Stress of Specimen with Different Initial Diameter-Height-Ratios of a Ferrite-Perlite and Austenite Stainless Steel
At: FEMS Euromat 2023, 3rd-7th September 2023, Frankfurt, Germany.S.Diederichs, D.Nugmanov, J.Ivanisenko, E.Kerscher:
Influence of High Pressure Torsion Extrusion on the Properties of Magnesium Alloy ZK60
At: FEMS Euromat 2023, 3rd-7th September 2023, Frankfurt, Germany.
Publications in August 2023:
Burmeister, M., Kerscher, E.:
Ultrasonic Vibration Influences on the Flow Stress Behavior of a Ferrite-Perlite and Austenite Stainless Steel
In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering. Springer, Cham.
https://doi.org/10.1007/978-3-031-41341-4_78
Publications in July 2023:
J.Sippel, E.Kerscher:
Influence of fracture toughness and defect size on vibration characteristics and resulting stress amplitude of AISI 52100 and AISI 4140 during ultrasonic fatigue testing
In: Procedia Structural Integrity 47 (2023), 608-616.
https://doi.org/10.1016/j.prostr.2023.07.062
Visit from the Royal Thai Embassy Berlin in July 2023
We would like to thank the Office of Educational Affairs (OEA) Berlin of the Royal Thai Embassy which was led by Ms. Sasipin Siripukdee (Minister Counsellor, Education) Ms. Maneerat Boonchim (Education Officer) and their colleague for visiting us on 13 July 2023.
Publications in June 2023:
J.Sippel, E.Kerscher:
Influence of a Thermomechanical Treatment on the Lifetime of a High Strength Steel in Very High Cycle Fatigue
In: AIP Conference Proceedings 2848, 020014 (2023).
https://doi.org/10.1063/5.0145133
M. Burmeister, E. Kerscher:
Investigation of the stress reduction and temperature increase due to ultrasonic vibrations with different amplitudes during compression tests of steels with varying specimen sizes.
In: Ultrasonics (2023) 107053.
https://doi.org/10.1016/j.ultras.2023.107053
15th World Conference on Titanium
Prof. Dr.-Ing. Eberhard Kerscher (left), Nafiseh Ghavidel (middle) and Stella Diederichs (right) attended the 15th World Conference on Titanium in Edinburgh (Scotland) on 12th-16th June 2023.
E.Kerscher, S.Diederichs, N.Ghavidel, L.Böhme, C.Godard:
Interrelationship of Manufacturing, Surface Morphology, and Mechanical Properties of Commercial Pure Titanium
At: World Titanium Conference 2023, 12th-16th June 2023, Edinburgh, Scotland.N. Ghavidel, E.Kerscher:
Influence of Thermomechanical Treatment on the Mechanical Properties of CP-Ti
At: World Titanium Conference 2023, 12th-16th June 2023, Edinburgh, Scotland.S.Diederichs, L.Morales-Rivas, E.Kerscher:
Identification of Twinning Systems in Commercially-Pure Titanium using Polarized Light Microscopy
At: World Titanium Conference 2023, 12th-16th June 2023, Edinburgh, Scotland.
ZwickRoell Härte Symposium
Prof. Dr.-Ing. Eberhard Kerscher and Stella Diederichs attended the ZwickRoell Härte Symposium in Ulm (Germany) on 11st May 2023 with the following presentation:
S.Diederichs, L.Böhme, E.Kerscher:
Instrumentierte Härteprüfung und polarisierte Lichtmikroskopie als alternative Methode zur Bestimmung der kristallographischen Orientierung von α-Titan
At: ZwickRoell Härte Symposium, 11st May 2023, Ulm , Germany (invited).
27th International Conference on Fracture and Structural Integrity
Jan Sippel attended the 27th International Conference on Fracture and Structural Integrity in Rome (Italy) on 21th-24th February 2023 with the following presentation:
J.Sippel (V), E.Kerscher:
Influence of a Thermomechanical Treatment on the Lifetime of a High Strength Steel in Very High Cycle Fatigue
At: 27th International Conference on Fracture and Structural Integrity, 21th-24th February 2023, Rome, Italy.
MatWerk- and SFB 926-Kolloquium
We would like to invite you to the MatWerk- and SFB 926-Kolloquium
Wednesday, 08.02.2023, at 4 p.m. in building 44 room 380
Presenter: Prof. Dr. Karsten Durst (Fachbereich Materialwissenschaft, Technische Universität Darmstadt)
Topic: "Metallic Nanoimprinting: Nanoscale surface structuring by confined plastic deformation"
MatWerk-Kolloquium
We would like to invite you to the MatWerk-Kolloquium on
Wednesday, 01.02.2023, at 4 p.m. in building 58 room 110
Presenter: Prof. Dr.-Ing. Dietmar Koch (Institut für Materials Resource Management MRM, Lehrstuhl Materials Engineering, Universität Augsburg)
Topic: "Development of advanced composites through resource efficient manufacturing processes"
MatWerk- and SFB 926-Kolloquium
We would like to invite you to the MatWerk- and SFB 926-Kolloquium
Wednesday, 11.01.2023, at 4 p.m. in building 44 room 380
Presenter: Frau Prof. Dr. Astrid Pundt (Institut für Angewandte Materialien – Werkstoffkunde IAM-WK, Karlsruher Institut für Technologie (KIT))
Topic: "Hydrogen effects on nanoscale and defect-rich metals: Nb-thin films and AM-316L as model systems"
Publications in October 2022:
L. Simo Kamga, J. Sippel, M. Oehler, M. Gedan-Smolka, B. Sauer:
Einfluss des Substratmaterials bei der Transferschmierung von Stahl-Bronze-Kontakten mit PA66-PTFE-cb Trockenschmierstoffen
Tribologie und Schmierungstechnik 69 (2022), Heft 4, pp. 5-11, DOI: doi.org/10.24053/TuS-2022-0018.
Publications in September 2022:
L. Morales-Rivas, A. Azadi, E. Kerscher :
Short fatigue crack growth in an artificial-defect-containing nanostructured bainitic steel
In: International Journal of Fatigue 166 (2023), 107219.
https://www.sciencedirect.com/science/article/pii/S0142112322004704
J. Hartig, B. Kirsch, S. Diederichs, E. Kerscher, Jan C. Aurich:
Entwicklung von PVD-Schutzschichten zur Leistungssteigerung galvanisch gebundener Hochleistungsschleifscheiben
In: Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen 70 (2022): S. 148-165.
20th International Conference on Fracture and Damage Mechanics (FDM2022)
Jan Sippel und Stella Diederichs attended the 20th International Conference on Fracture and Damage Mechanics (FDM2022) in Malaga (Spain) on 5th-7th September 2022 with the following presentations:
J.Sippel (V), E.Kerscher:
Influence of a Thermomechanical Treatment on the Lifetime of a High Strength Steel in Very High Cycle Fatigue
At: 20th International Conference on Fracture and Damage Mechanics, 5th-7th September 2022, Malaga, Spain.S.Diederichs, L.Böhme, E.Kerscher:
Interplay of micro notches and average grain size regarding the fatigue strength of cp‐Titanium
At: 20th International Conference on Fracture and Damage Mechanics, 5th-7th September 2022, Malaga, Spain.
Publications in March 2022:
L. Morales-Rivas, A. Azadi, E. Kerscher :
Fatigue behavior of nanostructured bainite: A morphological study of crack path
In: Procedia Structural Integrity 39 (2022), 515-527.
https://doi.org/10.1016/j.prostr.2022.03.125
Publications in January 2022:
A.Khayatzadeh, J. Sippel, S. Guth, K. H. Lang, E. Kerscher:
Influence of a Thermo-Mechanical Treatment on the Fatigue Lifetime and Crack Initiation Behavior of Quenched and Tempered Steel
In: Metals 2022,12, 204.
https://doi.org/10.3390/met12020204
L. Morales-Rivas:
Viewpoints on Technological Aspects of Advanced High-Strength Bainitic Steels
In: Metals 2022,12, 195.
https://doi.org/10.3390/met12020195
- Daniel Grell obtained his doctorate on January 18, 2022 with the topic „ Einfluss einer elektrochemisch aktiven Umgebung sowie thermischer und mechanischer Vorbehandlungen auf die Materialeigenschaften einer amorphen Zirkonium-Basislegierung “.
- The paper entitled “The influence of the crystallographic orientation when micro machining commercially pure titanium: a size effect” has been awarded as Best Paper 2021 in Sonderforschungsbereich 926.
- Luisa Böhme obtained her doctorate on September 23, 2021 with the topic „ Einflussfaktoren auf die Rissinitiierung, die Rissausbreitung und die Wechselfestigkeit von mikrostrukturierten Proben aus Reintitan“.
Publications in May 2021:
S. Kieren-Ehses, L Böhme, L. Morales-Rivas, J. Lösch, B. Kirsch, E. Kerscher, M. Kopnarski, J. C. Aurich:
The influence of the crystallographic orientation when micro machining commercially pure titanium: a size effect
In: Precision Engineering 2021.
https://doi.org/10.1016/j.precisioneng.2021.04.007
Virtual MatWerk colloquium in Kaiserslautern in cooperation with the scientific colloquium of the SFB 926
Wednesday, April 21st, 2021 at 4:00 p.m
Lecturer: Prof. Dr. Joachim Mayer (RWTH Aachen University)
Topic: "Beiträge der hochauflösenden TEM zur Charakterisierung funktionaler Randschichten in Werkstoffen"
The event will take place online as a Zoom conference. The access code can be requested from Prof. Kerscher by email.
- Matthias Uhrig obtained his doctorate on December 18, 2020 with the topic „ Modellbildung und Entwicklung experimenteller Methoden zur Vorhersage des Auftretens von Kavitationserosion bei metallischen Werkstoffen “.
- Special Issue announcement: "Advanced High-Strength Bainitic Steels", Metals MDPI
Guest editor: Lucia Morales-Rivas
Find more details here
Looking Forward to your contributions!
Publications in November 2020:
J.P. Sippel, E. Kerscher:
Properties of the Fine Granular Area and Postulated Models for Its Formation during Very High Cycle Fatigue – A Review
In: Applied Sciences 2020, 10, 8475.
https://doi.org/10.3390/app10238475
L. Morales-Rivas, F. Ram, D. Spriestersbach, J.P. Sippel, M. D. Graef, E. Kerscher:
Fine granular area linked to very high cycle fatigue in martensitic and bainitic steels: Characterization by means of EBSD-dictionary indexing
In: Scripta Materialia 2020, 194, 113644.
https://doi.org/10.1016/j.scriptamat.2020.113644
- Stefan Averbeck has obtained his doctorate on June 29, 2020 with the topic „Simulation der Entstehung von White Etching Cracks durch zyklische Druck-Torsions-Versuche“.
- Marcel Angst has obtained his doctorate on June 25, 2020 with the topic „Auftretenshäufigkeit nichtmetallischer Einschlüsse in Stählen“.
Publications in June, 2020:
S. Averbeck, D. Spriestersbach, E. Kerscher:
Mechanism of fine granular area and white etching crack formation in AISI 52100 bearing steel.
In: Theoretical and Applied Fracture Mechanics, 108 (2020) 102664.
https://doi.org/10.1016/j.tafmec.2020.102664
- Special Issue announcement: "Advanced High-Strength Bainitic Steels", Metals MDPI
Guest editor: Lucia Morales-Rivas
Find more details here
Looking Forward to your contributions!
- Daniel Spriestersbach has obtained his doctorate on October 28, 2019 with the topic „VHCF-Verhalten des hochfesten Stahls 100Cr6: Rissinitiierungsmechanismen und Schwellenwerte“.
- Werkstoffwoche 2019 and the 53. Metallographie-Tagung in Dresden, Germany
The AWP was almost completely represented at the Werkstoffwoche 2019 and the parallel 53rd Metallographie-Tagung. We have presented two posters "M. Burmeister, E. Kerscher: Einfluss von überlagertem Ultraschall auf das Verfestigungsverhalten von Metallen im quasistatischen Druckversuch" and "L. Böhme, A. Hebestreit, S. Kieren-Ehses, M. Bohley, B. Kirsch, J.C. Aurich, E. Kerscher: Präparation dünner Stege zur Bestimmung der kristallographischen Orientierung und deren Einfluss bei der Zerspanung von Reintitan auf der Mikroskala". Together with Sonja Kieren-Ehses from the FBK, Luisa Böhme gave a lecture on the topic "Influence of micro-milled structures on the fatigue properties of pure titanium". Jan Patrick Sippel presented his research topic carried out together with the group of Dr.-Ing. K.-H. Lang at the IAM-WK at the KIT: "Steigerung der Ermüdungsfestigkeit bei HCF- und VHCF-Beanspruchung durch eine thermomechanische Behandlung im Temperaturbereich der maximalen dynamischen Reckalterung". Eberhard Kerscher presented the Collaborative Research Center 926 in a lecture entitled: " Bauteiloberflächen – Morphologie auf der Mikroskala".
Publications in May 2018:
Eberhard Kerscher, Tilmann Beck, Volker Schulze, Detlef Löhe:
Otmar Vöhringer on the occasion of his 80th birthday.
In: International Journal of Materials Research 109 (2018) 5, 477-478. https://doi.org/10.3139/146.610040
L. Böhme, L. Morales-Rivas, S. Diederichs, E. Kerscher:
Crystal c-axis mapping of hcp metals by conventional reflected Polarized Light Microscopy: Application to untextured and textured cp-Titanium.
In: Materials Characterization 145 (2018) 573-581. https://doi.org/10.1016/j.matchar.2018.09.024
L. Morales-Rivas, S. Diederichs, L. Böhme, E. Gordo, A. Hebestreit, E. Kerscher:
Method for the detection of grain boundaries in alpha Ti-based alloysby means of polarized light microscopy and image processing in MATLAB.
In: Practical Metallography, 55 (2018) 10, 678-692.
Publications in March 2018:
Martin Bohley, Ingo G. Reichenbach, Sonja Kieren-Ehses, Lukas Heberger , Peter A. Arrabiyeh, Rolf Merz, Luisa Böhme, Julian Hering, Benjamin Kirsch, Michael Kopnarski, Eberhard Kerscher, Georg von Freymann, Jan C. Aurich:
Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings
In: Journal of Manufacturing and Materials Processing (2018) 2, 22.
https://doi:10.3390/jmmp2020022
Lucía Morales Rivas, post-doctoral researcher at AWP, has been bestowed with the Outstanding Thesis Award in the field of Materials Science and Engineering by the academic community at Universidad Carlos III de Madrid (Spain), a recognition for the high quality of original works of research based on their scientific and technological contributions to the stock of knowledge in their area. More information can be found under the following link. Publications in January 2018:
D. Grell, F. Dabrock, E. Kerscher:
Cyclic cryogenic pre-treatments influencing the mechanical properties of a bulk glassy Zr-based alloy
In: Fatigue & Fracture of Engineering Materials & Structures (2018)
http://dx.doi.org/10.1111/ffe.12777
- AWP is hosting during the winter semester 2019-2020 María Guadalupe Gómez, a visiting student of Industrial Engineering at the Universidad Tecnológica Nacional in Santa Fe, Argentina (UTN – FRSF). Guadalupe is currently performing her final undergraduate thesis for the company Metalurgica Galcom, a steelmaker which manufactures truck turntables and other bearing components. The project deals with the evaluation of a reengineering process in the company in terms of energy costs and product quality.
- Our former DAAD guest student at AWP, Adriana Eres Castellanos, has won the first prize of the 2019 FEMS Master Thesis Award Competition bestowed by the Federation of European Materials Societies, for her work entitled: “Effect of ausforming on the bainitic transformation in medium carbon steels”. Adriana Eres Castellanos was advised by Lucia Morales-Rivas on the crystallographic approach to the mentioned topic during her stay at TU-Kaiserslautern between February and April 2019, holding a research short-stay DAAD grant.
Information about exam Werkstoffkunde I/II f.H.a.F. (15.08.2019) only available on the German webpage! Student research projects (follow this Link for more information) Luisa Böhme achieves 2nd place at the 12th conference "Gefüge und Bruch" (Bochum, Germany, February 14-15, 2019) with her poster "Mechanische Eigenschaften mikrostrukturierter Ti-Miniaturproben unter zyklischer Belastung" within the collaborative research center 926. Publications in September 2018:
L. Böhme, L. Morales-Rivas, S. Diederichs, E. Kerscher:
Crystal c-axis mapping of hcp metals by conventional reflected Polarized Light Microscopy: Application to untextured and textured cp-Titanium.
In: Materials Characterization 145 (2018) 573-581. https://doi.org/10.1016/j.matchar.2018.09.024
L. Morales-Rivas, S. Diederichs, L. Böhme, E. Gordo, A. Hebestreit, E. Kerscher:
Method for the detection of grain boundaries in alpha Ti-based alloysby means of polarized light microscopy and image processing in MATLAB.
In: Practical Metallography, 55 (2018) 10, 678-692.
Publications in May 2018:
Eberhard Kerscher, Tilmann Beck, Volker Schulze, Detlef Löhe:
Otmar Vöhringer on the occasion of his 80th birthday.
In: International Journal of Materials Research 109 (2018) 5, 477-478.
- Publications in March 2018:
Lucía Morales Rivas, post-doctoral researcher at AWP, has been bestowed with the Outstanding Thesis Award in the field of Materials Science and Engineering by the academic community at Universidad Carlos III de Madrid (Spain), a recognition for the high quality of original works of research based on their scientific and technological contributions to the stock of knowledge in their area. More information can be found under the following link. Publications in January 2018:
D. Grell, F. Dabrock, E. Kerscher:
Cyclic cryogenic pre-treatments influencing the mechanical properties of a bulk glassy Zr-based alloy
In: Fatigue & Fracture of Engineering Materials & Structures (2018)
http://dx.doi.org/10.1111/ffe.12777