Publikationen 2024
Interaction and superposition of creep damage and high-cycle fatigue of coarse-grained nickel-base alloy 247
Oliver Jordan, Tuan Duc Nguyen, Philipp Lion, Tilmann Beck
https://doi.org/10.1080/09603409.2024.2310914
Investigating very high cycle fatigue (VHCF) behavior of AISI 347 and 304L including their welds for reactor internals at ambient and operating relevant temperature
G. Veile, E. Regitz, J. Rudolph, T. Schopf, M. Smaga, U. Fischer, M. Grimm, M. Patzer, S. Weihe, T. Beck
https://doi.org/10.5281/zenodo.10438974
Control concept for the regulation of the surface layer properties using consecutive cuts in cryogenic hard turning of AISI 52100
Felix Grossmann, Viktor Follmann, Tong Zhu, Julian Uebel, Stefan Wolke, Benjamin Kirsch, Marek Smaga, Jörg Seewig, Tilmann Beck, Jan C. Aurich
https://doi.org/10.1007/s11740-023-01259-7
Fatigue Analysis of the Nickel-Based Superalloy Inconel 617 by Fatigue Experiments and EBSD Data-Based Finite Element Simulations in Correlation with E· m Theories
Moritz Liesegang, Tilmann Beck
Publikationen 2023
Influence of Manufacturing and Load Conditions on the Phase Transformation and Fatigue of Austenitic Stainless Steels,Component Surfaces: Manufacturing-Morphology-Property Relationships
Tilmann Beck, Marek Smaga, Sergiy Antonyuk, Dietmar Eifler, Ralf Müller, Urbassek, Herbert M, Tong Zhu.
https://doi.org/10.1007/978-3-031-35575-2_11
Plasticity in cyclic indentation of a Cu-Zr-based bulk metallic glass after tensile loading: An experimental and molecular dynamics simulation study
Avila, Karina E; Vardanyan, Vardan Hoviki; Zhu, Tong; Küchemann, Stefan; Smaga, Marek; Urbassek, Herbert M.
https://doi.org/10.1016/j.jnoncrysol.2023.122486
Einflüsse unterschiedlicher Randschichtmorphologien auf die Ermüdungsfestigkeit von PBF-LB gefertigtem AlSi10Mg.
P. Lehner, B. Blinn, T. Beck.
https://doi.org/0.48447/ADD-2023-BB
Improving the Defect Tolerance and Fatigue Strength of AM AlSi10Mg.
P. Lehner, B. Blinn, T. Beck
https://doi.org/10.1002/adem.202201855
Influence of Surface Morphology on Fatigue and Tribological Behavior of TRIP/TWIP Steels.
Marek Smaga, Tilmann Beck, Michael Kopnarski, Rolf Merz, Kristin M. de Payrebrune und Stefan Wolke
https://doi.org/10.1007/978-3-031-35575-2_12
Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints.
Sophie Arweiler-Böllert, Moritz Liesegang, Tilmann Beck, Julia Jungbluth & Sebastian Schmeer
https://doi.org/10.1007/s11665-023-08325-2
Investigation of the tensile deformation behaviour in Ni-based superalloy inconel alloy 617 using EBSD-based finite element simulations and optical flow method.
M. Liesegang, P. Lion, T. Beck, M. Gräf & G. Steidl
https://doi.org/10.1007/s10853-023-08558-5
Short-Time Creep Deformation of the Coarse-Grained Nickel-Base Alloy 247 and Its Implications on the High-Cycle Fatigue Behavior
Oliver Jordan, Philipp Lion, Tilmann Beck
https://doi.org/10.1115/1.4056309
Influence of the Inherited Structure Induced by Al and Si Alloying on Microstructure Evolution and Mechanical Properties of 100Cr6 Steels T
arek Allam, Pascal Ostermayer, Bastian Blinn, Tilmann Beck, Wolfgang Bleck
https://doi.org/10.1002/srin.202200804
Numerical modelling of stress-strain response and deformation-induced martensite in metastable austenitic stainless steels under monotonic tensile loading
Hari Kisan Thammineni, Tong Zhu, Marek Smaga, Tilmann Beck, Ralf Müller
Publikationen 2022
Short-Time Creep Deformation of the Coarse-Grained Nickel-Base Alloy 247 and Its Implications On the High-Cycle Fatigue Behavior Oliver Jordan, Philipp Lion, Tilmann Beck
Journal of Engineering for Gas Turbines and Power : https://doi.org/10.1115/1.4056309
Conference: ASME Turbo Expo 2022: Turbomachinery Technical: https://doi.org/10.1115/GT2022-81676
Very high cycle fatigue (VHCF) behavior of austenitic stainless steels and their welds for reactor internals at ambient and operating relevant temperature M. Smaga, T. Daniel, E. Regitz, T. Beck, T. Schopf, G. Veile, S. Weihe, J. Rudolph, U. Fischer
A New Approach to Estimate the Fatigue Limit of Steels Based on Conventional and Cyclic Indentation Testing David Görzen, Pascal Ostermayer, Patrick Lehner, Bastian Blinn, Dietmar Eifler, Tilmann Beck
https://doi.org/10.3390/met12071066
Evaluation of the plastic deformation behavior of modified 100Cr6 steels with increased fractions of retained austenite using cyclic indentation tests Pascal Ostermayer, Klaus Burkart, Bastian Blinn, Holger Surm, Brigitte Clausen und Tilmann Beck
https://doi.org/10.1515/mt-2022-0087
Nano-sized Cu precipitation and microstructural evolution in aged ultralow and medium carbon steels X. Shen, D. Görzen, Z. Xu, B. Blinn, W. Bleck, T. Beck, U. Krupp, W. Song
Publikationen 2021
Analysis of the Subsurface Volume of Differently Finished AISI 52100 by Cyclic Indentation and X-Ray Diffraction
Pascal Ostermayer, Werner Ankener, Bastian Blinn, Marek Smaga, Dietmar Eifler, Tilmann Beck
https://doi.org/10.1002/srin.202100253
Process-influenced fatigue behavior of AISI 316L manufactured by powder- and wire-based Laser Direct Energy Deposition
B. Blinn, P. Lion, O. Jordan, S. Meiniger, S. Mischliwski b, C. Tepper b, C. Gläßner, J.C. Aurich, M. Weigold, T. Beck
https://doi.org/10.1016/j.msea.2021.141383
Influence of microstructural defects and the surface topography on the fatigue behavior of “additively-subtractively” manufactured specimens made of AISI 316L
B. Blinn, S. Greco, M. Smaga, M. Zimmermann, H. Hotz, D. Müller, J. Hartig, B. Kirsch, J.C. Aurich, T. Beck
https://doi.org/10.1002/mawe.202000266
Analyzing the influence of a deep cryogenic treatment on the mechanical properties of blanking tools by using the short-time method PhyBaLCHT
B.Blinn, S. Winter, M. Weber, M. Demmler, V. Kräusel, T. Beck
https://doi.org/10.1016/j.msea.2021.141846
Analysis of Hydrogen-Induced Changes in the Cyclic Deformation Behavior of AISI 300–Series Austenitic Stainless Steels Using Cyclic Indentation Testing
Sven Brück, Bastian Blinn, Katharina Diehl, Yannick Wissing, Julian Müller, Martina Schwarz, Hans-Jürgen Christ, Tilmann Beck, Thorsten Staedler, Xin Jiang, Benjamin Butz and Stefan Weihe
https://doi.org/10.3390/met11060923
Investigating the Influence of Process Parameters on the Mechanical Properties of Extruded Aluminum Tubes by Cyclic Indentation Tests
David Görzen, Florian Patrick Schäfke, Bastian Blinn, Christian Klose, Hans Jürgen Maier, Tilmann Beck
Publikationen 2020
High cycle fatigue behavior of high-Mn TWIP steel with different surface morphologies International Journal of Fatigue 134, 2020
M. W. Klein, B. Blinn, M. Smaga, T. Beck
https://doi.org/10.1016/j.ijfatigue.2020.105499
Evaluation of component‐similar rotor steel specimens with a local probabilistic approach for LCF Fatigue & Fracture of Engineering Materials & Structures
L. Mäde, K. Kumar, S. Schmitz, S. Gundavarapu, T. Beck
https://doi.org/10.1111/ffe.13166
Efficient staircase testing of probabilistic Haigh diagrams International Journal of Fatigue 137, 2020
A. Klawonn, T. Beck
https://doi.org/10.1016/j.ijfatigue.2020.105627
A probabilistic Haigh diagram based on a weakest link approach International Journal of Fatigue 133, 2020
A. Klawonn, A. Hagenacker, T. Beck
https://doi.org/10.1016/j.ijfatigue.2019.105419
Surface layer hardening of metastable austenitic steel Comparison of shot peening and cryogenic turning
H. Hotz, B. Kirsch, T. Zhu, M. Smaga, T. Beck, J.C. Aurich
https://doi.org/10.1016/j.jmrt.2020.11.109
Vibrational and magnetic signatures of extended defects in Fe
R. Meyer, A. Mutter, P. Umstätter, V. Schünemann, T. Beck, M. Smaga, H. M. Urbassek
https://doi.org/10.1016/j.jmrt.2020.11.109
Influence of different precipitation states of Cu on the quasi-static and cyclic deformation behavior of Cu alloyed steels with different carbon contents
D. Görzen, H. Schwich, B. Blinn, W. Bleck, T. Beck
https://doi.org/10.1016/j.ijfatigue.2020.105587
Mechanical behavior of annealed electrochemically deposited nanocrystalline nickel-iron alloys
J. E. Hoffmann, M.-T. Schmitt, D. Eifler, T. Beck, T. Hielscher, T. Eyrisch, P. Starke, M. Saumer, P. Klär
https://doi.org/10.3139/120.111475
Microstructural changes caused by friction loading in high manganese TWIP steel and case hardened 16MnCr5
A. Brodyanski, M. W. Klein, R. Merz, M. Smaga, T. Beck, M. Kopnarski
https://doi.org/10.1016/j.matchar.2020.110231
Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short time procedures
B. Blinn, F. Krebs, M. Ley, R. Teutsch, T. Beck
https://doi.org/10.1016/j.ijfatigue.2019.105301
Characterization of the precipitation behavior and resulting mechanical properties of copper-alloyed ferritic steel
H. Schwich, D. Görzen, B. Blinn, T. Beck, W. Bleck
https://doi.org/10.1016/j.msea.2019.138807
Analysis of the thermomechanical fatigue behavior of fully ferritic high chromium steel Crofer® 22 H with cyclic indentation testing
B. Blinn, D. Görzen, T. Fischer, B. Kuhn, T. Beck
https://mdpi.com/2076-3417/10/18/6461
Local shear strength distribution of ultrasonically welded hybrid Aluminium to CFRP joints
F. Staab, M. Liesegang, F. Balle
https://doi.org/10.1016/j.compstruct.2020.112481
Direct Link between Specific Magnetic Domain Activities and Magnetic Noise in Modulated Magnetoelectric Sensors
O. Urs, E. Golubeva, V. Röbisch, S. Toxvaerd, S. Deldar, R. Knöchel, M. Höft, E. Quandt, D. Meyners,J. McCord