Working package 1: Tool manufacturing
At the Institute for Manufacturing and Production Systems (FBK), novel milling tools with reduced or substituted primary‑raw‑material consumption are being developed, manufactured, and evaluated in terms of their operational performance. To this end, milling tool blanks are additively fabricated by high‑speed laser deposition welding (HS DED‑LB) with a functional hard‑metal coating, enabling a substantial portion of the tool volume to be replaced by more sustainable materials. The final tool geometry is then produced from these blanks by grinding, before the performance of the developed milling cutters is recorded in run‑time tests and compared against conventional reference tools.
The work package is divided into three successive sub‑areas:
WP 1.1 – Additive Manufacture of Cutting Tools
Using high‑speed laser deposition welding (HS DED‑LB), hard‑metal coatings with optimised mechanical and metallurgical properties are produced. The goal is to develop a suitable process window and to deliberately utilise recycled hard‑metal powder and alternative hard or matrix materials. In addition, tool blanks are fabricated with a ductile steel core and a hard hard‑metal edge coating in order to significantly reduce primary‑raw‑material consumption.
WP 1.2 – Design of the Grinding Process
From the additively manufactured tool blanks, milling tools are produced by grinding. The aim is to identify suitable grinding wheels and process parameters for the novel material combinations. Additionally, tools made from newly developed high‑strength steels are ground and characterised as an alternative substitution solution.
WP 1.3 – Characterisation of Operational Behaviour
The developed tools are tested in run‑time trials during milling of case‑hardened steels (42CrMo4, 100Cr6). Cutting forces, temperatures, and tool wear are recorded. The results serve as a direct comparison with conventional hard‑metal cutters and enable an assessment of the practical feasibility of the newly developed tools.
Sub‑project lead
Prof. Dr.-Ing. Jan C. Aurich
E-Mail: fbk@mv.rptu.de
Research associate
Dipl.-Ing. Robin Lemmens
E-Mail: robin.lemmens@rptu.de