2019:

• R. Schäfer, A. Theis, T. Zaremba, T. Reviol, M. Böhle: Aeroakustische Untersuchung eines Radialventilators mit einer Lattice-Boltzmann-Methode und Abgleich mit PIV-Messungen, Experimentelle Strömungsmechanik: 27. Fachtagung, 3.-5. September 2019, Erlangen, A. Delgado, B. Gatternig, M. Münsch, B. Ruck, A. Leder (Eds.), German Association for Laser Anemometry GALA e.v., 2019, pp. 41.1-41.9, ISBN 978-3-9816764-6-4, 2019
• G. Müller, C. Landfester, M. Böhle, R. Krewinkel: Turbine Vane Endwall Film Cooling Effectiveness of Different Purge Slot Configurations in a Linear Cascade, ASME TurboExpo, GT2019-90236
• B. Gwiasda, M. Mohr, D. Herrmann-Verspagen, M. Böhle: Influence of Turbulence Models in Transient Simulations of Inducers Under Steady Operation, AJKFluids2019-4640
• A. Theis, M. Böhle: Comparison of a Singularity - and an Inverse Design Method for Axial Flow Fans Based on Numerical Simulations, AJKFluids2019-4713
• M. Böhle, Y. Gu, A. Schimpf: Two Flow Models for Designing Hydrostatic Bearings With Porous Material, AJKFluids2019-4657
• X. Wei, F. Zhang, D. Appiah, K. Chen, S. Yuan, M. Böhle: Pressure fluctuation in side channel pumps using a modified impeller blade, AJKFluids 2019
• H. Seiler, M. Ortelt, M. Böhle: Development of a hydrostatic journal bearing with micro porous CMC material, AIAA Propulsion and Energy Forum/EATS 2019
• G. Yandong, M. Böhle, A. Schimpf, Y. Shougi: Modeling and Numerical Solution of Aerostatic Radial Bearing with Porous Material, Journal of Mechanical Engineering, China

2018:

• T. Reviol, S. Kluck, G. Ettringer, M. Böhle: Investigation of propeller mixer for agitation of non-Newtonian fluid flow to predict the characteristics within the design process, Chemical Engineering Science, 2018, 191, 420-435
• T. Reviol, S. Kluck, M. Böhle: A new design method for propeller mixers agitating nonnewtonian fluid flow, Chem. Eng. Sci., 2018, 190, 320–332
• P. Wang, T. Reviol, S. Kluck, P. Würtz, M. Böhle: Mixing of non-Newtonian fluids in a cylindrical stirred vessel equipped with a novel side-entry propeller, Chem. Eng. Sci., 2018, 190, 384–395

2017:

• A. Baum, C. Berger, C. Landfester, M. Böhle: A Critical Comparison of Numerical and Experimental Results for the Examination of a Cascade Consisting of NACA 65-010 1% Profiles, Fluids Engineering Division Summer Meeting, 30th July - 3rd August 2017, Waikoloa, Hawaii, USA
• S. Fleder, F. Hassert, M. Böhle, B. Zientek-Strietz: Influence of Gas-Liquid Multiphase-Flow on Acoustic Behaviour and Performance of Side-Channel-Pumps; An unconventional Way to reduce the noise level of a Side-Channel Pump on demand, Fluids Engineering Division Summer Meeting, 30th July - 3rd August 2017, Waikoloa, Hawaii, USA
• T. Bian, Q. Han, M. Böhle: Comparison Between NACA 65 Profile and Circular Arc Blade Based on Numerical Investigation, Fluids Engineering Division Summer Meeting, 30th July - 3rd August 2017, Waikoloa, Hawaii, USA
• T. Bian, Q. Han, M. Böhle: A Design Method for Cascades Consisting of Circular Arc Blades with Constant Thickness, International Journal of Fluid Machinery and Systems, 2017
• F. Zhang, S. Yuan, Q. Fu, J. Pei, M. Böhle, X. Jiang: Cavitation-Induced Unsteady Flow Characteristics in the First Stage of a Centrifugal Charging Pump. Journal of Fluids Engineering, 2017

2016:

• F. Zhang, A. Fleder, M. Böhle, S. Yuan: Effect of suction side blade profile on the performance of a side channel pump. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2016
• M. Böhle, A. Fleder, M. Mohr: Study of the Losses in Fluid Machinery with the Help of Entropy, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA
• H. Roclawski, M. Gugau, M. Böhle: CFD Analysis of a Radial Turbine during Load Step Operation of an Automotive Turbocharger, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA
• H. Roclawski, C. Oberste-Brandenburg, M. Böhle: Conjugate Heat Transfer Analysis of a Centrifugal Compressor for Turbocharger Applications, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA
• H. Krieg, D. Nowak, M. Bortz, A. Knapp, C. Geil, H. Roclawski, M. Böhle: Entscheidungsunterstützung für Planung und Betrieb von Trinkwasserversorgungsanlagen, Fachbericht Trinkwasserversorgung, Juli, 2016
• A. Knapp, C. Geil, H. Krieg, D. Nowak, M. Bortz, H. Roclawski, W. Hausen, M. Böhle: H2Opt: A software prototype for the optimization of drinking water systems, 3rd International Rotating Equipment Conference, 14-15th September 2016, Düsseldorf, Germany
• S. Fleder, B. Gwiasda, M. Appel, M. Böhle, M. Ortelt, H. Hald: Design and testing of radial gas bearings with porous media, using fiber-reinforced C/C composites, 3rd International Rotating Equipment Conference, 14-15th September 2016, Düsseldorf, Germany
• C. Geil, A. Knapp, H. Roclawski, M. Böhle, H. Württemberger: Modeling of vertical wells in the water procurement - Application to the case study water procurement area East Kaiserslautern, 14th Computing and Control for the Water Industry Conference, 7-9th November 2016, Amsterdam, Netherlands
• S. Fleder, F. Hassert, M. Böhle, B. Zientek-Strietz: Feasibility Study on the Use of Side Channel Pumps for Low Viscosity Fluids, with Fracking or ther Hydrocarbon Processing
  Applications, 45th Turbomachinery & 32nd Pump Symposia, 12-15th September 2016, Houston, Texas, USA
• T. Reviol, S. Kluck, F. Genuit, V. Reim and M. Böhle, Investigation of the influence of viscoelastic behaviour on the agitation of non-Newtonian fluid flow, Chemical Engineering Science, 2016, 152, 55-64, doi:10.1016/j.ces.2016.05.035

2015:

• A. Fleder, M. Böhle: A Systematical Study of the Influence of Blade Length, Blade Width, and Side Channel Height on the Performance of a Side Channel Pump, Journal of Fluids Engineering, 2015
• A. Schneider, D. Conrad, M. Böhle: Lattice Boltzmann simulation of the flow field in pump intakes - a new approach, Journal of Fluids Engineering, 2015
• D. Conrad, A. Schneider, M. Böhle: Accuracy of non-newtonian lattice boltzmann simulations, Journal of Computational Physics, 2015
• D. Nowak, M. Bortz, H. Roclawski: Decision Support for the Design and Operation of Water Supply Systems, Procedia Engineering, 2015
• S. Fleder, B. Gwiasda, T. Reviol, M. Böhle: Windage Power Losses in High Speed Rotating Machines for Different Gap Ratios not having Axial Flow: A Generally Valid Estimation and Literature Overview, 16th Conference of Fluid Flow, 1-4th September 2015, Budapest, Hungary
• T. Reviol, F. Genuit, V. Reim, S. Kluck, M. Böhle: Untersuchung des Einflusses viskoelastischer Materialeigenschaften auf den Leistungsbedarf von Rührern, Vortragssammelband zum 18. Köthener Rührerkolloquium, 2015, 87-115, ISBN:978-3-96057-010-3

2014:

• Böhle, M.; Frey, T.: Numerical and Experimental Investigations of the Three-Dimensional-Flow Structure of Tandem Cascades in the Sidewall Region. Journal of Fluids Engineering, 2014
• Roclawski, H.; Gugau, M.; Langecker, F.; Böhle, M.: Influence of Degree of Reaction on Turbine Performance for Pulsating Flow Conditions. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16-20th June 2014, Düsseldorf, Germany
• Gugau, M.; Roclawski, H.: On the Design and Matching of Turbocharger Single Scroll Turbines for Pass Car Gasoline Engines. Journal of Engineering for Gas Turbines and Power, 2014
• Reviol, T.; Kluck, S.; Böhle, M.: Erweiterung der Auslegungsverfahren von Rührern und Anwendung an einem Propellerviskosimeter. Chemie Ingenieur Technik, 2014

2013:

• Reviol, R.; Franze, R.; Böhle, M.; Wiedermann, A.; Takeishi, K.:Cross Flow Effects on Endwall Heat Transfer in Film-Cooled Turbine Nozzle Guide Vanes. ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, 3-7th June 2013, San Antonio, Texas, USA
• Reviol, T.; Böhle, M.: Beitrag zur Auslegungsprozedur von Rührwerken und Anwendung an einem Propellerviskosimeter, Vortragssammelband zum 16. Köthener Rührerkolloqium, 2013, 14-25, ISBN: 978-3-86011-067-6

2012:

• Reviol, R.; Franze, R.; Böhle, M.; Wiedermann, A.; Takeishi, K.: Numerical Investigations on the Effect of Vortex Structures on Local Heat Transfer in a Large Scale Turbine Cascade. Journal of Engineering and Technology Vol.2 No.1, p. 163–174, 2012
• Roclawski, H.; Gugau, M., Böhle, M.: Multidisciplinary Design Optimization of a Mixed Flow Turbine Wheel, ASME Turboexpo 2012.
• Roclawski, H.; Böhle, M.: On Similarity when Developing Centrifugal Pumps on Test Rigs Operated with Air, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 2012.

2011:

• R. Reviol, R. Franze, M. Böhle, A. Wiedermann, K. Takeishi: Numerical Investigations of the Effect of Vortex Structures on Local Heat Transfer in a Large Scale Turbine Cascade, 10th International Gas Turbine Congress, 13-18th November 2011, Osaka, Japan
• R. Dishur, M. Böhle, A. Wiedermann, K. Takeishi: Effect of Turbulence Modelling and Mesh Refinement on Film Cooling Flow Analysis, 9th European Conference on Turbomachinery-Fluid Dynamics and Thermodynamics, 21-25th March 2011, Istanbul, Turkey
• A .Fleder, T. Müller, M. Böhle: A Theoretical Method to Improve the Side Channel Pump Efficiency, 9th European Conference on Turbomachinery-Fluid Dynamics and Thermodynamics, 21-25th March 2011, Istanbul, Turkey
• M. Hilgert, M. Böhle, A. Wiedermann: Stationary Gas Turbine Intake Design and its Impact on a Transoinc Compressor Stage, 9th European Conference on Turbomachinery-Fluid Dynamics and Thermodynamics, 21-25th March 2011, Istanbul, Turkey

bis 2010:

• H.J. Kammer, M. Fallen, M. Böhle, T. Pfeffer: Verfahren zur Ermittlung der Körperschalldämmung durch Entkoppelelemente in Kfz-Abgasanlagen, 36.Jahrestagung für Akustik, Daga-Tagung, Berlin, März 2010
• T. Pfeffer, H. J. Kammer, M. Womann, M. Fallen, M. Böhle: Körperschalldämmung von Turboladergeräuschen in Abgasanlagen, ATZ, 111.Jahrgang, 07-08, 2009
• K. Pies, M. Böhle, M. Fallen, S. Sentpali: Implementation of a Sound Source Approach into the Transfer Matrix Description of Duct Systems Inter-Noise, Ottawa, Canada, August 23-26, 2009
• H. Kipp, D. Hellmann, M. Böhle: Numerical and Experimental Study on a Wall shear stress calibration setup for hot-film probes by the use of a Radial flow cell Assay, ASME-FEDSM-2009, PaperNo. 78, Colorado, USA
• M. Hilgert, M. Böhle: A CFD-Based Investigation of Boundary Layer Skew in the Hub Region of a Low Speed Axial Compressor and its Influence on Performance and Losses, ASME-FEDSM-2009, PaperNo. 78181, Colorado, USA
• M. Böhle, T. Müller: Evaluation of the Flow Inside a Side Channel Pump by the Application of an Analytical Model and CFD, ASME-FEDSM-2009, PaperNo. 78023, Colorado, USA
• M. Böhle, R. Becker: Verification of a Lattice-Boltzmann Method by Using Analytical Flow Solutions of Standard Flow Problems, ASME-FEDSM-2009, PaperNo. 78342, Colorado, USA
• C. Schluer, M. Böhle, M. Cagna: Numerical Investigation of the Secondary Flows and Losses in a High Turning Tandem Compressor Cascade, European Conference on Turbomachinery-Fluid Dynamics and Thermodynamics, 23-27th March 2009, Graz, Austria
• M. Böhle, U. Stark: A Numerical Investigation of the Effect of Entrance Boundary Layer Skew on the Aerodynamic Performance of Low Aspect Ratio, High Turning Compressor Cascades, European Conference on Turbomachinery-Fluid Dynamics and Aerodynamics, 5-9th March 2007, Athens, Greece

bis 2005:

• M. Böhle, M. Cagna, L. Itter: Compressible Flow in Inlet Guide Vanes with Mechanical Flaps, ASME-Turbo-2004, Paper GT2004-53191, 2004
• M. Böhle: Experimental and Numerical Investigations of a Threedimensional Boundary Layer in the Region between a Casing and a Blade Tip, 4rd Conference on Pumps and Fans, Bejing August 2002
• M. Cagna, M. Böhle: Application of CFD Methods for the Simulation of the Flow through a Filter in Dependency of the Operating Time, ASME-FEDSM-2002, Paper No. 31101, Montreal, July 2002
• L. Itter, M. Böhle: Determining the Quality of Numerical Solutions of Flows through Turbomachinery Components, ASME-FEDSM- 2002, Paper No. 31319, Montreal, July 2002
• M. Böhle, M. Cagna: Using Numerical Results for the Development of Algebraic Equations for the Calculation of the Pressure Drop over Folded Filter Mediums, ASME-FEDSM-2001, Paper No. 18217, New Orleans, May 2001
• M. Böhle: Application of Analytical and Numerical Methods for the Design of Transonic Axial Compressor Stages, 2nd International WSES-Conference: Mathematics and Computers in Mechanical Engineering, Vouliagmeni (Greece), July 2000

bis 1999:

• M. Böhle: Using the Fluidmechanical Equations for the Design of Impeller Pumps, 3rd Conference on Pumps and Fans, Bejing Oktober 98
• M. Böhle: Ein CAE-Konzept zur strömungsmechanischen Auslegung von Axialpumpen Industriepumpen + Kompressoren 3/97, Vulkan-Verlag, Essen
• M. Böhle: Software-Engineering for the Development of Axial Pumps, 2nd Pump Congress, Istanbul, April 1996
• M. Böhle: Strömungstechnische Auslegung eines Vordrallreglers mit mechanischen Klappen für Turbomaschinen, VDI-Berichte, Nr. 1208, 1995
• M. Böhle: An Inverse Design Procedure for Axial Pumps Working on Personal Computers, International Fluids, Singapore, Juni 1994
• M. Böhle, H. Holthoff, E. Laurien, J. Wiesbaum: Sensitivity Analysis of the Chemical Behaviour of Reentry Flows in Nonequilibrium, 6th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, Colorado Springs, 20-23 Juni 94
• M. Böhle: Sensitivitätsanalysen des chemischen Verhaltens von Wiedereintrittsströmungen im Nichtgleichgewicht, ZLR-Forschungsbericht 93-01, Braunschweig 1993
• E. Laurien, M. Böhle, H. Holthoff, J. Wiesbaum: Numerical Modelling of Chemically Reacting Reentry Flows in: H. Oertel jun. and H. Körner (eds.): Proceedings of the Third Aerospace Symposium Braunschweig, Springer, Berlin, (1993)
• M. Böhle, A. Lieseberg, J. Maul: Results of Sensitivity Analyses for Establishing a Shock Tube Measuring Program, EUROMECH 296, Real Gas Effects in High Enthalpy Fows, Sept. 1992
• M. Böhle, H. Holthoff, E. Laurien: Numerical Simulation of Chemically Reacting Reentry Flows, Inter. Conference on Methods of Aerophysical Research (ICMAR 92), Novosibisk (Russia), August 1992
• M. Böhle, H. Holthoff, E. Laurien: Zur Sensitivität von Wiedereintrittsströmungen gegenüber aerothermodynamischen Modellparametern, DGLR-Jahrbuch I (1992)
• E. Laurien, M. Böhle, H. Holthoff, J. Wiesbaum: Finite-Element Algorithm for Chemically Reacting Hypersonic Flows, AIAA 92-0754 (1992)
• E. Laurien, M. Böhle, H. Holthoff, J. Wiesbaum: Numerical Approximation of Hypersonic Shocks in a Finite-Element Method, Zeitschrift für Angewandte Mathematik und Mechanik 72, T320-T322 (1992)
• E. Laurien, M. Böhle, H.Holthoff, J. Wiesbaum: Reentry Aerothermodynamics Simulations using the Taylor-Galerkin Finite-Element Method, Proc. 13th IMACS World Congress on Computation and Applied Mathematics (1991)
• E. Laurien, M. Böhle, H. Holthoff, J. Wiesbaum: Modelluntersuchungen zur numerischen Berechnung von Wiedereintrittsströmungen, DGLR-Jahrbuch I, 613-620 (1990)
• U. Stark, M. Böhle: Theoretische und experimentelle Untersuchungen an ungestaffelten Gittern aus Profilen mit mechanischen Klappen Forschung im Ingenieurwesen, VDI-Verlag, 6/90 , (1990)
• U. Stark, M. Böhle: Diskussionsbeitrag zum Vortrag von U. Schmidt-Eisenlohr: Variable Geometrie bei Hochleistungsverdichtern, Vor- und Nachteile, DGLR Jahrestagung, Fachausschuß: Luftatmende Antriebe, 1989