Müller C.; Kirsch, B.; Aurich J.C. (2017): Compact Air Bearing Spindles for Desktop Sized Machine Tools. In Small Machine Tools for Small Workpieces, pp. 21–34.

Arrabiyeh, P.A.; Dethloff, M.; Müller, C.; Kirsch, B.; Aurich, J.C. (2019): Optimization of Micropencil Grinding Tools Via Electrical Discharge Machining. In Journal of Manufacturing Science and Engineering (141/3), 31005-1-31005-9.

Aurich, J.C.; Müller, C.; Walk, M. (2013): High-frequency tool-spindle for multifunctional, replaceable rotor-modules. In Production Engineering - Research and Development (7/5), pp. 555–560.

Aurich, J.C.; Müller, C.; Bohley, M.; Arrabiyeh, P.A.; Kirsch, B. (2017): Recent Developments in Desktop-Sized Machine Tools. In Solid State Phenomena (261), pp. 425–431.

Mayer, P.; Kirsch, B.; Hotz, H.; Müller, C.; Becker, S.; von Harbou, E. et al. (2018): Verformungsbedingte Aushärtung beim kryogenen Drehen. In CIRP Journal of Manufacturing Science and Technology (23), pp. 6–19.

Aurich, J.C.; Kirsch, B.; Müller, C.; Heberger, L. (2014): Quality of drilled and milled rivet holes in carbon fiber reinforced plastics. In Procedia CIRP 24 - Proceedings of the New Production Technologies in Aerospace Industry - 5th Machining Innovations Conference, pp. 56–61.

Bohley, M.; Müller, C.; Kirsch, B.; Aurich, J.C. (2017): Integration of a confocal microscope in a desktop machine tool for in situ process control. In Proceedings of the 17th International conference of the European Society for Precision Engineering and Nanotechnology (euspen), pp. 122–123.

Bohley, M.; Reichenbach, I.G.; Müller, C.; Kirsch, B.; Aurich, J.C. (2016): Compact hydrodynamic spindle module for micromachining applications. In 16th international conference on the European Society for Precision Engineering and Nanotechnology.

Bohley, M.; Reichenbach, I.G.; Müller, C.; Aurich, J.C. (2016): Development of a desktop machine tool for integrated ultra-small micro end mill production and application. In Proceedings of the 11th International Conference on Micro Manufacturing Paper (13).

Müller, C.; Bohley, M.; Schneider, F.; Aurich, J.C. (2015): Servo tool for chip formation studies in micro milling. In 15th international conference of the European Society for Precision Engineering and Nanotechnology, pp. 307–308.

Müller, C.; Bohley, M.; Schneider, F.; Aurich, J.C. (2015): Servo tool for chip formation studies in micro milling. In 15th international conference of the European Society for Precision Engineering and Nanotechnology, pp. 225–226.

Müller, C.; Bohley, M.; Reichenbach, I.G.; Aurich, J.C. (2016): In Situ Topology Measurement of Micro Structured Surfaces with a Confocal Chromatic Sensor on a Desktop Sized Machine Tool. In Advanced Materials Research 1140 - Proceedings of the WGP Congress 2016 - Progress in Production Engineering, pp. 392–399.

Müller, C.; Bohley, M.; Kirsch, B.; Aurich, J.C. (2017): A novel rotational air bearing axis for the manufacturing of ultra-small micro end mills. In Proceedings of the 17th International conference of the European Society for Precision Engineering and Nanotechnology (euspen), pp. 144–145.

Müller, C.; Greco, S.; Kirsch, B.; Aurich, J.C. (2017): A Finite Element Analysis of Air Bearings Applied in Compact Air Bearing Spindles. In Procedia CIRP 58 - Proceedings of the 16th CIRP Conference on Modeling of Machine Operations, pp. 607–612.

Müller, C.; Reichenbach, I.G.; Aurich, J.C. (2014): Design and numerical simulation of an air turbine for a high frequency tool spindle. In 9th International Conference on Micro Manufacturing.

Schneider, F.; Lohkamp, R.; Kirsch, B.; Kuhn, C.; Müller, C.; Aurich, J.C. (2016): Investigation of Chip Formation and Surface Integrity when Micro-cutting cp-Titanium with Ultra-fine Grain Cemented Carbide. In Procedia CIRP 45 - Proceedings of the 3rd CIRP Conference on Surface Integrity, pp. 115–118.